Traxxas Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

SUCHES AS:
One Diff Carrier
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to car

This thing is frequently gotten with the above stated thing.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building

SUCHES AS:
Two Output Gears
Two Spider Equipments
Spider Gear Shaft and Diff Carrier Assistance
Instruction Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Regularly gotten with the thing that you are currently reviewing.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for use with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

SUCHES AS:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Regularly gotten with the thing that you are currently reviewing.



This is a CVD Coupling Rebuild Kit used for various Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FUNCTIONS:
Black oxide rust preventive finish on the coupling

SUCHES AS:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm size x 9mm length
(2) Set screw 4.0 x 3mm

You will certainly like this thing if you have the thing just above pointed out.

Gear Set, Differential (Output Gears, Spider Gears/ Shaft)

This is the Differential Equipment Set for the Traxxas X-01 Vehicle, TRAD42**.

FUNCTIONS:
Solidified steel building

SUCHES AS:
Two Output Gears
Two Spider Equipments
One Spider Gear Shaft
One Carrier Assistance

Lots of others have gotten this thing together with the thing that you are currently reviewing.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Construction
Blue Rubber Sealed

SUCHES AS:
Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Vehicle

SPECIFICATIONS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Density: 5mm (0.19")

This is a superb enhancement to the thing currently being discussed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

SUCHES AS:
Two Ball Bearings

REQUIRES:
Assembly to car

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).

Lots of others have gotten this thing together with the thing that you are currently reviewing.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Construction
Blue Rubber Sealed

SUCHES AS:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

REQUIRES:
Assembly onto Vehicle

SPECIFICATIONS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Requires
4 Overall of these Bearings.

Regularly gotten with the thing that you are currently reviewing.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

SUCHES AS:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
Two plans needed to finish truck