Traxxas Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

SUCHES AS:
One Diff Carrier
2 Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to car

This thing is frequently acquired with the above mentioned thing.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel construction

SUCHES AS:
2 Output Gears
2 Spider Equipments
Spider Gear Shaft and Diff Carrier Support
Guideline Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Often acquired with the thing that you are presently reading about.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

SUCHES AS:
One differential ring equipment
One pinion equipment

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Often acquired with the thing that you are presently reading about.



This is a CVD Coupling Rebuild Package used for numerous Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FUNCTIONS:
Black oxide rust preventive finish on the coupling

SUCHES AS:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

You will like this item if you have the item just above stated.

Gear Set, Differential (Output Gears, Spider Gears/ Shaft)

This is the Differential Equipment Set for the Traxxas X-01 Vehicle, TRAD42**.

FUNCTIONS:
Hardened steel construction

SUCHES AS:
2 Output Gears
2 Spider Equipments
One Spider Gear Shaft
One Carrier Support

Lots of others have acquired this thing in addition to the thing that you are presently reading about.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

SUCHES AS:
2 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Thickness: 5mm (0.19")

This is a amazing addition to the thing presently being reviewed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

SUCHES AS:
2 Ball Bearings

REQUIRES:
Assembly to car

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one needed).

Lots of others have acquired this thing in addition to the thing that you are presently reading about.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

SUCHES AS:
2 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Within of the Wheel Centers, the Truck Requires
4 Overall of these Bearings.

Often acquired with the thing that you are presently reading about.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

SUCHES AS:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Guideline sheet

REQUIRES:
2 packages had to complete truck