Traxxas Cover, Gear (Clear)

This is the optional Clear Gear Cover for use on the Traxxas Slash 4x4.
**Will not fit the Ultimate Slash LCG, for that Gear Cover, order TRAC7477.**

FEATURES:
Plastic building
Clear in color

CONSISTS OF:
One Clear Gear Cover

REQUIRES:
Installation on the automobile

Want an additional wonderful product to compliment the above pointed out product?

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Gear

REQUIRES:
Assembly onto automobile

Below is a wonderful product that lots of others have actually bought at the same time.

Input Shaft (Slipper Shaft)/ B

This is the Input Shaft for use on the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building
Black in color

CONSISTS OF:
One Input Shaft
One Bearing Adapter
One Pin

REQUIRES:
Installation on the automobile

SPECIFICATIONS:
Length: 58mm (2.3")

Get this product to improve the one you read around.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FEATURES:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

CONSISTS OF:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Remaining clutch pieces

Below is a wonderful product that lots of others have actually bought at the same time.

Cover, Center Driveshaft (Clea

This is the Center Driveshaft Cover for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Clear nylon building

CONSISTS OF:
One Center Driveshaft Cover

REQUIRES:
Installation over driveshaft

SPECIFICATIONS:
Length: 210mm (8.3")
Width: 15mm (0.59")

Below is a wonderful product that lots of others have actually bought at the same time.

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 13 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of two which are utilized on the E-Maxx double motor
    set-up.

This product compliments the main item here.

Street Fighter SC 2.2"/3.0" Tires (2)

This is a pair of Pro-Line Street Fighter Short Course Tires for the
Traxxas Slash, Slash 4x4, Slayer, HPI Blitz and SC10 Vehicles.

FEATURES:
Based upon the latest in high efficiency on-road tire technology, the
Street Fighter SC has the best balance of G force enhancement and
style that will keep your truck turning heads
High density molded foam inserts
M2 compound

CONSISTS OF:
2 Pro-Line Street Fighter and Foam Inserts
Proline decals

REQUIRES:
Installing to wheels
Tire glue (DTXR2000, DTXR2002)

SPECIFICATIONS:
Width: 1.83" (47mm)
Outer Diameter: 4.27" (108mm)
Installing Bead: 2.2" (56mm) Outer x 3.0" (76mm) Inner

Many others have actually bought this product together with the product that you are currently reading about.



These are the Pro-Line Front Split Sixer Red Bead-Loc On Black Wheels
for the 2 Wheel Drive Traxxas Slash.

FEATURES:
Nylon building
Red in color
Black bead-locs
*KEEP IN MIND* - Pro-Line does NOT advise these for use with brushless
systems

CONSISTS OF:
2 Front Split Sixer Wheels
Twelve 3x10mm Button Head Screws

REQUIRES:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 41.2mm (1.6")
Hex: 12mm