Traxxas Xo-1 Connector Power Tab

This is the Power Tap Port for the Traxxas XO-1, TRAD42**.

FEATURES:
Changes broken power tap adapters

CONSISTS OF:
Port with Wire and Red 2-Pin Port and Zip Tie

This thing praises the main item right here.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building and construction

CONSISTS OF:
2 different plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECS:
Magnet diameter: 5mm
Magnet density: 2mm

The below thing likewise pairs actually well with the thing being gone over.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature Sensor Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electric powered Traxxas cars

CONSISTS OF:
Mount, Plastic Tie, and Thermal Pad

This is a fantastic addition to the thing presently being gone over.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Completely put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Connects to the differential with one screw pin
Functions on the front or back, right or left of automobile

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

NEEDS:
Setting up on chassis

You will certainly enjoy this product if you have the product previously mentioned.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FEATURES:
Stainless-steel bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECS:
Inside diameter: 6mm (0.24")
Outdoors diameter: 13mm (0.51")
Width: 5mm (0.20")

Want one more terrific thing to compliment the above pointed out thing?

Sensor Temperature/Voltage Short

This is the Brief Temperature and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to show battery voltage and
    temperature level

CONSISTS OF:
Brief Temperature and Voltage Sensor

SPECS:
Length: 9.5" (241mm)

This is a fantastic addition to the thing presently being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Created for use with many Park Leaflet ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality guarantee

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female adapters with wire, use GPMM3107
This port can be utilized to replace BEC-type adapters.

You will certainly enjoy this product if you have the product previously mentioned.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Guideline sheet

NEEDS:
2 plans had to finish truck