Traxxas Xo-1 Connector Power Tab

This is the Power Tap Port for the Traxxas XO-1, TRAD42**.

FUNCTIONS:
Replaces broken power tap adapters

CONSISTS OF:
Port with Wire and Red 2-Pin Port and Zip Tie

This product compliments the main item here.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal building and construction

CONSISTS OF:
2 various plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECS:
Magnet size: 5mm
Magnet thickness: 2mm

The below product also pairs actually well with the product being talked about.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature level Sensor Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electric powered Traxxas automobiles

CONSISTS OF:
Mount, Plastic Tie, and Thermal Pad

This is a amazing addition to the product presently being talked about.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Totally assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Attaches to the differential with one screw pin
Works on the front or rear, right or left of automobile

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

NEEDS:
Setting up on chassis

You will love this product if you have the product just above pointed out.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FUNCTIONS:
Stainless-steel bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECS:
Inside size: 6mm (0.24")
Outdoors size: 13mm (0.51")
Width: 5mm (0.20")

Want one more excellent product to compliment the above mentioned product?

Sensor Temperature/Voltage Short

This is the Short Temperature level and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to display battery voltage and
    temperature level

CONSISTS OF:
Short Temperature level and Voltage Sensor

SPECS:
Length: 9.5" (241mm)

This is a amazing addition to the product presently being talked about.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also called a JST connector.

FEATURES:
Developed for use with the majority of Park Leaflet ElectriFly electronic devices
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality warranty

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECS:
Plug Size-
    Length: 13mm (overall with flanges)
    Width: 5.5mm
    Height: 3mm

REMARKS:
For the female adapters with wire, use GPMM3107
This connector can be utilized to change BEC-type adapters.

You will love this product if you have the product just above pointed out.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

CONSISTS OF:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Guideline sheet

NEEDS:
2 bundles needed to complete truck