Traxxas Xo-1 Connector Power Tab

This is the Power Tap Connector for the Traxxas XO-1, TRAD42**.

FUNCTIONS:
Replaces busted power tap connectors

CONSISTS OF:
Connector with Wire and Red 2-Pin Connector and Zip Tie

This product compliments the main item below.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal construction

CONSISTS OF:
2 different plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECIFICATIONS:
Magnet size: 5mm
Magnet thickness: 2mm

The below product also pairs really well with the product being talked about.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature level Sensing unit Mount for the Traxxas TQi Telemetry System.

FEATURES:
For usage with electrical powered Traxxas vehicles

CONSISTS OF:
Mount, Plastic Tie, and Thermal Pad

This is a amazing enhancement to the product presently being talked about.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Fully assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping sections from dirt
Connects to the differential with one screw pin
Works on the front or rear, right or left of automobile

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

REQUIRES:
Setting up on chassis

You will enjoy this product if you have the product above discussed.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for usage on the E-Revo

FUNCTIONS:
Stainless-steel bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside size: 6mm (0.24")
Outdoors size: 13mm (0.51")
Width: 5mm (0.20")

Want one more fantastic product to enhance the above discussed product?

Sensor Temperature/Voltage Short

This is the Brief Temperature level and Voltage Sensing unit from Traxxas.

FEATURES:
Functions with the Traxxas Link system to show battery voltage and
    temperature level

CONSISTS OF:
Brief Temperature level and Voltage Sensing unit

SPECIFICATIONS:
Length: 9.5" (241mm)

This is a amazing enhancement to the product presently being talked about.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Designed for usage with most Park Leaflet ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality guarantee

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female connectors with wire, usage GPMM3107
This connector can be used to change BEC-type connectors.

You will enjoy this product if you have the product above discussed.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

CONSISTS OF:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Guideline sheet

REQUIRES:
2 bundles had to finish truck