Traxxas Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to connect in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Secure positive locking spring packed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic ports
Two sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

This item compliments the main item right here.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to connect in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring packed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

CONSISTS OF:
Two black female plastic ports
Two sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

This item compliments the above gone over item.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for usage in heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows ability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for usage in almost every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)

The below item also sets actually well with the item being gone over.



This is the Hitec X2 A/C Plus Double Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Double inputs with two independent circuits
Powered by either 11-18V DC or 100-240V A/C power sources
10A power supply
0.1-10A adjustable charge present for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, comes to a head batteries 1-3 times in a
    row to ensure a complete charge
Ten programmable profile settings for each channel
Permits remote control by means of mobile phone with optional WiFi module
    (not included), order HRCP4228
Internal balancing circuits
Charge Master software allows keeping an eye on pack voltage, cell voltage
    and other data by means of desktop computer, in addition to starting and
    upgrading firmware
LiPo battery meter
Battery internal resistance meter
One year limited guarantee from the date of purchase from HITEC
    RCD USA, INC

CONSISTS OF:
X2 A/C Plus Double Input Battery Charger, A/C Power Cable, Universal
    Balancing Board, Balance Adapter, two 18AWG Charging Cables

REQUIRES:
A/C input or 11-18V DC input

SPECIFICATIONS:
Charge Current Range: 0.1-10.0 amps
Optimum Charge Output: A/C 100W / DC 100W x 2
A/C Input: 100-240V A/C
DC Input: 11-18V DC
Overall Charge Circuit Power: 100W A/C, 200W DC Input
Discharge Current Range: 10W x 2
Release Present Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Range: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15lbs (975g)
Measurements: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)