Traxxas Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it impossible to link in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Secure favorable locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
2 black male plastic connectors
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

This product compliments the main item below.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it impossible to link in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
2 black female plastic connectors
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

This product compliments the above discussed product.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows capability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in almost every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes lots of stock brushed motors
Four magnet, 4 pole rotor for greater torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's option

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

The below product also pairs really well with the product being discussed.



This is the Hitec X2 A/C Plus Dual Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Dual inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V A/C power sources
10A power supply
0.1-10A adjustable charge existing for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to ensure a full charge
10 programmable profile settings for each channel
Permits remote control by means of mobile phone with optional WiFi module
    (not included), order HRCP4228
Internal balancing circuits
Charge Master software enables keeping an eye on pack voltage, cell voltage
    and other data by means of computer, along with initiating and
    updating firmware
LiPo battery meter
Battery internal resistance meter
One year minimal service warranty from the date of purchase through HITEC
    RCD USA, INC

INCLUDES:
X2 A/C Plus Dual Input Battery Battery charger, A/C Power Cord, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

NEEDS:
A/C input or 11-18V DC input

SPECS:
Charge Current Range: 0.1-10.0 amps
Maximum Charge Output: A/C 100W / DC 100W x 2
A/C Input: 100-240V A/C
DC Input: 11-18V DC
Total Charge Circuit Power: 100W A/C, 200W DC Input
Discharge Current Range: 10W x 2
Discharge Current Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Range: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15lbs (975g)
Measurements: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)