Traxxas Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to link in reverse
Textured surface for simple gripping
Compatible with high-current 12-gauge wire
Secure favorable locking spring crammed terminals for consistent
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic adapters
Two sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins

This item praises the main item below.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to link in reverse
Textured surface for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring crammed terminals for consistent
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
Two black female plastic adapters
Two sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins

This item praises the above talked about item.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows ability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in almost every environment (not planned for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes many stock brushed motors
Four magnet, four pole rotor for greater torque
1.4" size slotted stator
Detachable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

The listed below item likewise sets really well with the item being talked about.



This is the Hitec X2 Air Conditioning Plus Double Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Double inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V Air Conditioning source of power
10A power supply
0.1-10A adjustable charge current for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to ensure a full charge
10 programmable profile settings for each channel
Allows push-button control by means of mobile phone with optional WiFi module
    (not included), order HRCP4228
Internal balancing circuits
Charge Master software allows keeping an eye on pack voltage, cell voltage
    and other information by means of computer, as well as initiating and
    updating firmware
LiPo battery meter
Battery internal resistance meter
One year restricted warranty from the date of purchase from HITEC
    RCD USA, INC

CONSISTS OF:
X2 Air Conditioning Plus Double Input Battery Charger, Air Conditioning Power Cable, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

NEEDS:
Air Conditioning input or 11-18V DC input

SPECIFICATIONS:
Charge Current Variety: 0.1-10.0 amps
Maximum Charge Output: Air Conditioning 100W / DC 100W x 2
Air Conditioning Input: 100-240V Air Conditioning
DC Input: 11-18V DC
Total Charge Circuit Power: 100W Air Conditioning, 200W DC Input
Discharge Current Variety: 10W x 2
Discharge Present Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capability Variety: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15lbs (975g)
Measurements: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)