Traxxas Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity security makes it difficult to link backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Secure favorable locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic adapters
Two sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

This product compliments the main item below.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity security makes it difficult to link backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Secure, favorable locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
Two black female plastic adapters
Two sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

This product compliments the above reviewed product.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programs ability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for use in almost every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Detachable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

The listed below product likewise sets actually well with the product being reviewed.



This is the Hitec X2 A/C Plus Double Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Double inputs with two independent circuits
Powered by either 11-18V DC or 100-240V A/C power sources
10A power supply
0.1-10A adjustable charge existing for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to ensure a full charge
10 programmable profile settings for each channel
Allows push-button control via mobile phone with optional WiFi module
    (not consisted of), order HRCP4228
Internal balancing circuits
Charge Master software application allows keeping an eye on pack voltage, cell voltage
    and other data via computer, along with initiating and
    updating firmware
LiPo battery meter
Battery internal resistance meter
One year restricted guarantee from the date of purchase from HITEC
    RCD U.S.A, INC

CONSISTS OF:
X2 A/C Plus Double Input Battery Battery charger, A/C Power Cable, Universal
    Balancing Board, Balance Adapter, two 18AWG Charging Cables

NEEDS:
A/C input or 11-18V DC input

SPECIFICATIONS:
Charge Current Variety: 0.1-10.0 amps
Optimum Charge Output: A/C 100W / DC 100W x 2
A/C Input: 100-240V A/C
DC Input: 11-18V DC
Total Charge Circuit Power: 100W A/C, 200W DC Input
Discharge Current Variety: 10W x 2
Release Present Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Variety: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15lbs (975g)
Dimensions: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)