Traxxas Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to link in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Safe and secure favorable locking spring packed terminals for constant
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
2 black male plastic ports
2 sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

This product praises the main item here.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to link in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for constant
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
2 black female plastic ports
2 sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

This product praises the above gone over product.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for usage in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB shows ability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for usage in almost every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
4 magnet, 4 pole rotor for higher torque
1.4" diameter slotted stator
Removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery connector of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

The below product additionally pairs really well with the product being gone over.



This is the Hitec X2 AC Plus Dual Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Dual inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V AC source of power
10A power supply
0.1-10A adjustable charge current for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to ensure a full charge
10 programmable profile settings for each channel
Permits remote control via mobile phone with optional WiFi module
    (not consisted of), order HRCP4228
Internal balancing circuits
Charge Master software application permits keeping an eye on pack voltage, cell voltage
    and other data via desktop computer, as well as starting and
    updating firmware
LiPo battery meter
Battery internal resistance meter
One year restricted guarantee from the date of purchase through HITEC
    RCD USA, INC

CONSISTS OF:
X2 AC Plus Dual Input Battery Charger, AC Power Cord, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

REQUIRES:
AC input or 11-18V DC input

SPECIFICATIONS:
Charge Current Variety: 0.1-10.0 amps
Optimum Charge Output: AC 100W / DC 100W x 2
AC Input: 100-240V AC
DC Input: 11-18V DC
Total Charge Circuit Power: 100W AC, 200W DC Input
Discharge Current Variety: 10W x 2
Release Present Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capability Variety: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15pounds (975g)
Dimensions: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)