Traxxas Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity security makes it impossible to connect backwards
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Safe positive locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
2 black male plastic adapters
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

This item praises the main item below.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide area, gold-plated terminals
Reverse polarity security makes it impossible to connect backwards
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
2 black female plastic adapters
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

This item praises the above reviewed item.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming capability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for use in almost every environment (not intended for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes many stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Switch, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery adapter of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

The below item additionally pairs truly well with the item being reviewed.



This is the Hitec X2 Air Conditioner Plus Double Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Double inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V Air Conditioner power sources
10A power supply
0.1-10A adjustable charge current for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, comes to a head batteries 1-3 times in a
    row to make sure a full charge
10 programmable profile settings for each channel
Enables remote control via smartphone with optional WiFi module
    (not consisted of), order HRCP4228
Internal balancing circuits
Charge Master software application enables keeping track of pack voltage, cell voltage
    and other data via personal computer, as well as starting and
    updating firmware
LiPo battery meter
Battery internal resistance meter
One year minimal service warranty from the date of purchase through HITEC
    RCD USA, INC

INCLUDES:
X2 Air Conditioner Plus Double Input Battery Battery charger, Air Conditioner Power Cord, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

NEEDS:
Air Conditioner input or 11-18V DC input

SPECIFICATIONS:
Charge Current Range: 0.1-10.0 amps
Maximum Charge Output: Air Conditioner 100W / DC 100W x 2
Air Conditioner Input: 100-240V Air Conditioner
DC Input: 11-18V DC
Overall Charge Circuit Power: 100W Air Conditioner, 200W DC Input
Discharge Current Range: 10W x 2
Release Present Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Range: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15lbs (975g)
Dimensions: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)