Traxxas Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to connect backwards
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Protect, favorable locking spring crammed terminals for consistent
    contact
Several locking barbs keep terminals secure

CONSISTS OF:
One black female plastic port
One black male plastic port
Two sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

This is a wonderful enhancement to the product presently being gone over.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programming ability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for use in nearly every environment (not meant for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
4 magnet, four pole rotor for greater torque
1.4" diameter slotted stator
Removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

Get this product to enhance the one you are reading around.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Ideal for 2WD or 4WD short course racing or yard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% greater power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Developer Car Card
    (CSEM6300) needed, not consisted of)
Proportional brake with reverse lockout
Waterproof*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Instructions

NEEDS:
Battery port of modeler's choice

SPECIFICATIONS:
ESC
Input Voltage: Maximum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery port
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC rated Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

REMARKS:
*Not meant for operation while submerged in liquid. If unit is
    run in wet conditions, rinse with fresh water to remove dirt
    or corrosives, then fully dry unit.
Maximum recommended automobile weight is 6.5lbs (2.95kg)