Traxxas Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity defense makes it difficult to connect in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals protect

CONSISTS OF:
One black female plastic connector
One black male plastic connector
2 sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins

This is a wonderful addition to the item presently being gone over.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for usage in heavier
    cars such as E-Revos or E-Maxx class cars)
USB programs capability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for usage in nearly every environment (not meant for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces many stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" size slotted stator
Detachable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery connector of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)

Get this item to improve the one you are reading about.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Ideal for 2WD or 4WD short course racing or backyard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Developer Vehicle Card
    (CSEM6300) required, not included)
Proportional brake with reverse lockout
Waterproof*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Directions

NEEDS:
Battery connector of modeler's choice

SPECIFICATIONS:
ESC
Input Voltage: Maximum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery connector
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC ranked Japanese bearings
Dimensions: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

COMMENTS:
*Not meant for operation while immersed in liquid. If device is
    operated in damp conditions, wash with fresh water to eliminate dirt
    or corrosives, then fully dry unit.
Maximum suggested vehicle weight is 6.5pounds (2.95kg)