Traxxas Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to link in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring packed terminals for constant
    contact
Multiple locking barbs keep terminals protect

CONSISTS OF:
One black female plastic adapter
One black male plastic adapter
Two sets of gold metal pins
Guideline sheet

NEEDS:
Soldering wires to the metal pins

This is a fantastic addition to the item presently being discussed.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in much heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming ability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in nearly every environment (not meant for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces many stock brushed motors
4 magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery adapter of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

Get this item to boost the one you are reading about.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Ideal for 2WD or 4WD brief course racing or yard bashing
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Programmer Automobile Card
    (CSEM6300) needed, not included)
Proportional brake with reverse lockout
Waterproof*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Instructions

NEEDS:
Battery adapter of modeler's option

SPECIFICATIONS:
ESC
Input Voltage: Optimum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery adapter
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC ranked Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

REMARKS:
*Not meant for operation while immersed in liquid. If unit is
    operated in damp conditions, rinse with fresh water to remove dirt
    or corrosives, then fully dry unit.
Maximum advised car weight is 6.5lbs (2.95kg)