Traxxas Cone Split Beveled

Replacement SPLIT BEVEL CONE for the Traxxas Nitro Vee Boat. This cone is
part of the engine assembly. (Image .12)

BUNDLE
INCLUDES:
1-Beveled Cone

FEATURES:
Black steel building and construction
Beveled cone shape with split on one side

REMARKS:
Beveled cone beings in front of the flywheel
7/19/94sk

Many others have actually bought this product along with the product that you are currently reading about.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel building and construction
Phillips drive insert
Countersunk and self-tapping
Replacement parts developed for the Traxxas Nitro Hawk

INCLUDES:
(6) Screws

SPECIFICATIONS:
Size: 3mm
Length: 10mm

Many others have actually bought this product along with the product that you are currently reading about.

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk maker screws for the Traxxas Nitro Hawk.

FEATURES:
Metal building and construction
Countersunk (flat head) maker screws
Phillips drive insert
Replacement parts developed for the Traxxas Nitro Hawk

INCLUDES:
6 Screws

SPECIFICATIONS:
Length: 10mm
Size: 3mm

Below is a wonderful product that numerous others have actually bought at the exact same time.

Ball Bearing 5 X 11Mm (2)

These are 5 x 11 x 4mm Ball Bearings from Traxxas.

FEATURES:
Ball bearings reduce friction and last longer than bushings.
Chrome steel construction.
Used to upgrade from bushings.

INCLUDES:
2 5 x 11mm bearings

SPECIFICATIONS:
Inner Size: 5mm
Outer Size: 11mm
Density: 4mm

REMARKS:
To tidy bearings utilize DTXC2458 Power Shot Cleaner

The below product likewise sets truly well with the product being gone over.

3.3 Engine Ips Shaft W/Pull Start

This is the Traxxas TRX 3.3 Racing Engine with Pull Starter.

FEATURES:
For usage in all Traxxas TRX2.5 and TRX 3.3 equipped vehicles
Pull starter can be removed to install the EZ Start
60% more peak power than the TRX2.5, with nearly 50% more power
    under the curve for strong linear acceleration
Round rear exhaust with one-piece IPS crankshaft
Composite body slide valve carburetor with high-volume air filter
Blue anodized aluminum cooling head with molded head protector

INCLUDES:
Traxxas TRX 3.3 Racing Engine with Pull Starter and glow plug
One instruction manual (TRAZ5300)
One service support guide and parts lis.
One set of engine decals
One engine break-in DVD
One little bottle of air filter oil
One air filter

REQUIRES:
Vehicle fuel with 10%, 20% or 33% nitro content

SPECIFICATIONS:
Displacement: .20 cu in (3.3cc)
Practical RPM: N/A
Output: N/A
Weight: 10.9oz (305g)
Distance in between mounting holes same side: 0.39" (10mm)
Distance in between mounting holes opposite side: 1.2" (32mm)
Distance from center of engine to front bearing: 1.2" (32mm)
Distance/bottom of mounting flanges/top of cylinder head: 3.5" (88mm
Width of mounting flanges: 44mm

REMARKS:
Other versions of the TRX 3.3 engine include;
    #5404 Single Shaft without Starter, TRAG5404
    #5406 Multi-Shaft without Starter, TRAG5406
    #5409 Multi-Shaft w/Recoil Pull Starter, TRAG5409