Traxxas Clutch Shoes W/Spring Hvy Duty

These are Replacement Clutch Shoes for the Traxxas T-Maxx.
These mount to the flywheel and engage the clutch.

FEATURES:
Carbon Building and construction
Black in Color

INCLUDES:
2 Clutch Shoes
One Spring

NEEDS:
Assembly into the clutch system.

Often acquired with the item that you are currently checking out.

Ball Bearing 5 X 11Mm (2)

These are 5 x 11 x 4mm Ball Bearings from Traxxas.

FEATURES:
Ball bearings minimize friction and last longer than bushings.
Chrome steel construction.
Used to upgrade from bushings.

INCLUDES:
2 5 x 11mm bearings

SPECIFICATIONS:
Inner Diameter: 5mm
Outer Diameter: 11mm
Thickness: 4mm

COMMENTS:
To clean bearings use DTXC2458 Power Shot Cleaner

This item praises the above gone over item.

Alum Exhaust Header 2.5 Or 2.5R Revo

This is the Aluminum Exhaust Header for the Traxxas Revo.

FEATURES:
Aluminum construction
Silver in color
Fluted on tuned pipe end for better silicone coupler connection
Heatsink engine installing flange

INCLUDES:
One Exhaust Header

NEEDS:
Assembly to car

SPECIFICATIONS:
Length: 59mm (2.32")
Pipeline diameters: Outside-13mm (.52")
Inside -10mm (.40")
Width in between engine exhaust mount holes: 22mm (.866")

COMMENTS:
If required, engine/header installing screws, use TRAG5142.

Numerous others have actually acquired this item in addition to the item that you are currently checking out.

O-Ring & Seal Set For 2.5 Carb

This is an O-Ring and Seal Set for the TRX 2.5 Engine.

FEATURES:
Total seal and ring set.
Black, blue and red rubber construction.
Brass ring installation tools.

INCLUDES:
2 brass ring installation tools.
One blue rubber carburetor level seal.
Two silver 5.3x7.8x0.6mm crush washers.
Two large 13x1mm red rubber o-rings.
Four 10x1mm red rubber o-rings.
2 2.5x1.15mm black rubber o-rings.
3 2x1mm black rubber o-rings.
One installation diagram.

REQUIRES:
Changing existing o-rings

COMMENTS:
This replacement set is developed for the 2.5 engine by Traxxas just.

You will enjoy this product if you have the product just above mentioned.

E Clips/ C Rings

This is a assortment of e-clips, c-clips, and body clips for the Traxxas line
of vehicles and trucks.
INCLUDES:
28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,
4 of the shock C-clips and 3 body clips.

This item praises the above gone over item.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel construction
Phillips drive insert
Countersunk and self-tapping
Replacement parts developed for the Traxxas Nitro Hawk

INCLUDES:
(6) Screws

SPECIFICATIONS:
Diameter: 3mm
Length: 10mm

Want an additional excellent item to match the above mentioned item?

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk maker screws for the Traxxas Nitro Hawk.

FEATURES:
Metal construction
Countersunk (flat head) maker screws
Phillips drive insert
Replacement parts developed for the Traxxas Nitro Hawk

INCLUDES:
Six Screws

SPECIFICATIONS:
Length: 10mm
Diameter: 3mm