Traxxas Clutch Shoes W/Spring Hvy Duty

These are Replacement Clutch Shoes for the Traxxas T-Maxx.
These mount to the flywheel and engage the clutch.

FEATURES:
Carbon Building
Black in Color

CONSISTS OF:
2 Clutch Shoes
One Spring

NEEDS:
Assembly into the clutch system.

Regularly acquired with the thing that you are currently reviewing.

Ball Bearing 5 X 11Mm (2)

These are 5 x 11 x 4mm Ball Bearings from Traxxas.

FEATURES:
Ball bearings reduce friction and last longer than bushings.
Chrome steel construction.
Used to upgrade from bushings.

INCLUDES:
2 5 x 11mm bearings

SPECIFICATIONS:
Inner Size: 5mm
External Size: 11mm
Density: 4mm

COMMENTS:
To tidy bearings use DTXC2458 Power Shot Cleaner

This thing compliments the above talked about thing.

Alum Exhaust Header 2.5 Or 2.5R Revo

This is the Aluminum Exhaust Header for the Traxxas Revo.

FEATURES:
Aluminum building
Silver in color
Fluted on tuned pipe end for much better silicone coupler connection
Heatsink engine mounting flange

CONSISTS OF:
One Exhaust Header

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Length: 59mm (2.32")
Pipe sizes: Outside-13mm (.52")
Inside -10mm (.40")
Width in between engine exhaust mount holes: 22mm (.866")

COMMENTS:
If required, engine/header mounting screws, use TRAG5142.

Many others have actually acquired this thing in addition to the thing that you are currently reviewing.

O-Ring & Seal Set For 2.5 Carb

This is an O-Ring and Seal Set for the TRX 2.5 Engine.

FEATURES:
Total seal and ring set.
Black, blue and red rubber construction.
Brass ring setup tools.

INCLUDES:
2 brass ring setup tools.
One blue rubber carburetor level seal.
Two silver 5.3x7.8x0.6mm crush washers.
Two big 13x1mm red rubber o-rings.
Four 10x1mm red rubber o-rings.
2 2.5x1.15mm black rubber o-rings.
Three 2x1mm black rubber o-rings.
One setup diagram.

REQUIRES:
Changing existing o-rings

COMMENTS:
This replacement set is created for the 2.5 engine by Traxxas just.

You will certainly enjoy this thing if you have the thing earlier pointed out.

E Clips/ C Rings

This is a assortment of e-clips, c-clips, and body clips for the Traxxas line
of cars and trucks.
INCLUDES:
28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,
4 of the shock C-clips and 3 body clips.

This thing compliments the above talked about thing.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel building
Phillips drive insert
Countersunk and self-tapping
Replacement parts created for the Traxxas Nitro Hawk

CONSISTS OF:
(6) Screws

SPECIFICATIONS:
Size: 3mm
Length: 10mm

Want another great thing to compliment the above mentioned thing?

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk device screws for the Traxxas Nitro Hawk.

FEATURES:
Metal building
Countersunk (flat head) device screws
Phillips drive insert
Replacement parts created for the Traxxas Nitro Hawk

CONSISTS OF:
Six Screws

SPECIFICATIONS:
Length: 10mm
Size: 3mm