Traxxas Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FEATURES:
Nylon construction, gray in color
Changes worn or broken chassis

INCLUDES:
One long wheelbase chassis

REQUIRES:
Setup on the E-Maxx

SPECS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)

This thing praises the above talked about thing.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
Changes worn or harmed lower chassis braces

INCLUDES:
Right and left lower chassis braces

REQUIRES:
Setup on the E-Maxx

SPECS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

Here is one more thing that praises the thing being talked about.

Skid Plate Gray E-Maxx

This is the Transmission Skid Plate
for the Traxxas E-Maxx.

FEATURES:
Gray nylon construction

INCLUDES:
One nylon transmission skid plate

REQUIRES:
Setup on the E-Maxx

SPECS:
Length: 4.60" (117mm)
Width: 2.40" (61mm)

This thing praises the main item below.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.
This skidplate bolts to the Chassis (essential #4922) and the Bulkheads essential #4930
and supplies protection to the front differential.

FEATURES:
Skidplate is built of high effect formed black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or difficult landings from jumps.
Stainless steel mounting plate supplies stiff mounting surface.

INCLUDES:
One plastic front skidplate
One stainless steel mounting plate.

REQUIRES:
Installing on chassis with 4 3x10mm countersunk machine screws
    (not consisted of, use TRAC3277).

Often bought with the thing that you are currently reviewing.

3 X 12Mm Cntrsnk Machine Screw (6)

This is a plan of six 3x12mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo monster truck, can likewise be utilized in any
    application where a 3x12mm countersunk screw is required

INCLUDES:
Six 3x12mm Traxxas Countersunk Hex Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 12mm
Diameter: 3mm

Want one more wonderful thing to enhance the above stated thing?



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Suitable upgrade for radios found in RTR automobiles
Throttle and steering trim and reverse
Guiding double rate dial
Throttle end point adjustment
Channel 3 switch
Throttle fail safe
One year minimal warranty through Hobby Services beginning at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
    Handbook and On/Off Switch

REQUIRES:
Servos of modeler's option
4 AA batteries for transmitter

SPECS:
Transmitter:
Sending Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Present Drain: 100mA or less

    Receiver;
Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Present Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work properly when other type of battery is utilized

COMMENTS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    equipment such as brushless ESCs