Traxxas Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
Changes worn or damaged lower chassis braces

CONSISTS OF:
Right and left lower chassis braces

NEEDS:
Setup on the E-Maxx

SPECS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

This item praises the main item right here.

Chassis, E-Maxx (Long Wheelbas

This is the Long Wheelbase Chassis for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, gray in color
Changes worn or broken chassis

CONSISTS OF:
One long wheelbase chassis

NEEDS:
Setup on the E-Maxx

SPECS:
Length: 11.5" (292.1mm)
Width: 6.5" (165.1mm)

You will certainly love this thing if you have the thing just above discussed.

Box, Receiver Sealed W/Silicon

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES:
Changes broken receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas E-Maxx
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.

Here is one more item that praises the item being discussed.

Motor Plate For Single Motor

This is the optional Single Motor Plate for the
Traxxas E-Maxx 16.8V RTR.

FEATURES:
Aluminum building and construction, blue in color
Developed for a clean set up of a single brushless motor system in
the E-Maxx 16.8V RTR (requires gear cover number TRAC3997)

CONSISTS OF:
One Aluminum Motor Plate

NEEDS:
Setup and motor cover number TRAC3997

The listed below item also pairs truly well with the item being discussed.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FEATURES:
Plastic building and construction, black in color

CONSISTS OF:
Center half shafts (three internal splined and 2 external splined)

NEEDS:
Setup on the automobile

SPECS:
Size: 17.2mm (0.68")

Lots of others have actually gotten this item in addition to the item that you are currently reviewing.

Skid Plate Gray E-Maxx

This is the Transmission Skid Plate
for the Traxxas E-Maxx.

FEATURES:
Gray nylon building and construction

CONSISTS OF:
One nylon transmission skid plate

NEEDS:
Setup on the E-Maxx

SPECS:
Length: 4.60" (117mm)
Width: 2.40" (61mm)

Want one more fantastic item to compliment the above pointed out item?

3 X 12Mm Cntrsnk Machine Screw (6)

This is a bundle of six 3x12mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel building and construction, Black in color
Utilized on the Traxxas Revo monster truck, can likewise be utilized in any
    application where a 3x12mm countersunk screw is required

CONSISTS OF:
6 3x12mm Traxxas Countersunk Hex Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 12mm
Size: 3mm

You will certainly love this thing if you have the thing just above discussed.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Ideal upgrade for radios discovered in RTR automobiles
Throttle and steering trim and reverse
Steering dual rate dial
Throttle end point modification
Channel three switch
Throttle fail safe
One year limited guarantee through Hobby Services starting at date
    of purchase

CONSISTS OF:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
    Handbook and On/Off Switch

NEEDS:
Servos of modeler's option
4 AA batteries for transmitter

SPECS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Present Drain: 100mA or less

    Receiver;
Dimensions: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shown servo)
Battery Fail Safe Voltage: 3.8V*
Present Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work correctly when other kind of battery is utilized

COMMENTS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    devices such as brushless ESCs