Traxxas Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building

SUCHES AS:
2 Blocks

NEEDS:
Traxxas Rustler or Stampede

Several others have acquired this thing along with the thing that you are currently checking out.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Likewise called the vertical kingpin

SUCHES AS:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Several others have acquired this thing along with the thing that you are currently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

SUCHES AS:
One left and ideal steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

This is a superb addition to the thing currently being gone over.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building

SUCHES AS:
2 48mm pins
2 34mm pins
2 30mm pins
2 28mm pins
2 25mm pins

NEEDS:
Setup on the Rustler, Stampede or Outlaw

REMARKS:
For a complete suspension pin set order TRAC4940

Right here is one more thing that compliments the thing being gone over.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

SUCHES AS:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with connectors

NEEDS:
Setting up in car

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Suching as Shaft: 3.2" (81mm)
Length Not Suching as Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

This is a superb addition to the thing currently being gone over.

Steering Blocks (R & S)

These are the Steering Blocks for the initial
Traxxas Stampede and Rustler trucks. They are made of black enhanced nylon
and are what the front axles go through.

PACKAGE
SUCHES AS: 2 steering blocks (one left and one right)

Not for the Nitro Stampede, or Stampede VXL

Right here is a great thing that many others have bought at the very same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

SUCHES AS:
(1) Front shock tower for the Traxxas Stampede

This thing compliments the above gone over thing.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building

SUCHES AS:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outside diameter: 7mm

Want one more great thing to match the above mentioned thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)