Traxxas Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building

SUCHES AS:
Two Blocks

NEEDS:
Traxxas Rustler or Stampede

Lots of others have actually gotten this product along with the product that you are presently checking out.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

SUCHES AS:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Lots of others have actually gotten this product along with the product that you are presently checking out.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

SUCHES AS:
One left and best steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

This is a wonderful enhancement to the product presently being discussed.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel construction

SUCHES AS:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

NEEDS:
Installation on the Rustler, Stampede or Bandit

REMARKS:
For a total suspension pin set order TRAC4940

Here is one more product that compliments the product being discussed.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

SUCHES AS:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Installing in car

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not provided

This is a wonderful enhancement to the product presently being discussed.

Steering Blocks (R & S)

These are the Steering Blocks for the original
Traxxas Stampede and Rustler trucks. They are made from black strengthened nylon
and are exactly what the front axles go through.

PACKAGE
SUCHES AS: Two steering blocks (one left and one right)

Not for the Nitro Stampede, or Stampede VXL

Here is a terrific product that lots of others have actually bought at the very same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Height: 2 3/4"
Density: 1/4"
Width at base: 2 3/4"
Width at top: 2"

SUCHES AS:
(1) Front shock tower for the Traxxas Stampede

This product compliments the above discussed product.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated construction

SUCHES AS:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outdoors size: 7mm

Want one more terrific product to compliment the above mentioned product?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)