Traxxas Camber Links Frt/Rr (R & S)

These are Non-Adjustable Camber Link for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Construction

CONSISTS OF:
Two Brief Links
Two Long Links

NEEDS:
Traxxas Rustler or Stampede

SPECS:
Brief Long
Length: 77 mm (3.03") 90 mm (3.54")
Width: 9 mm (0.354") 9 mm (0.354")
Height: 4 mm (0.157") 4 mm (0.157")

Get this product to enhance the one you are reading around.

Gearbox Halves L&R Grey

This is a Left and Right Gearbox half with Idler Shaft for the
Traxxas Stampede and Traxxas Rustler.

FEATURES:
Gray plastic building
Steel idler shaft

CONSISTS OF:
One gearbox
One idler shaft

COMMENTS:
This part fit the requirement and XL version of both the Stampede
and Rustler.

Get this product to enhance the one you are reading around.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in numerous Traxxas vehicles.
The front suspension arm hinge pins pass through this piece.

FEATURES:
Gray nylon building

CONSISTS OF:
One front bulkhead

NEEDS:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

COMMENTS:
This part is utilized on the following vehicles:
    Rustler, Outlaw, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

The listed below product also pairs really well with the product being talked about.

Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made of black molded nylon
For the Traxxas Stampede

SPECS:
Length of front plate: 5 5/8"
Density of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Density of rear plate: 1/8"
Width of rear plate: 2 1/8"

CONSISTS OF:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Want one more wonderful product to compliment the above discussed product?

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Construction

CONSISTS OF:
Two Blocks

NEEDS:
Traxxas Rustler or Stampede

Get this product to enhance the one you are reading around.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is exactly what the
guiding knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and left to guarantee correct setup

CONSISTS OF:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles