Traxxas Bumper, Rear/ Slash

This is the Back Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Back Bumper and bumper mount

NEEDS:
Setup on the Traxxas Slash

The listed below product additionally pairs actually well with the product being talked about.

Bumper, Front/ Slash

This is the Front Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Bumper and bumper mount

NEEDS:
Setup on the Traxxas Slash

Many others have actually gotten this product along with the product that you are presently reviewing.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to hold wheelie bar arm and wheels in
    location

INCLUDES:
Put together optional Wheelie Bar Mount with mounting directions and
    hardware

NEEDS:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

Regularly gotten with the product that you are presently reviewing.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Created for models with a slipper clutch
Black plastic construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

Below is one more product that praises the product being talked about.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Building and construction

INCLUDES:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECIFICATIONS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Density: 2.0 mm (0.082")

COMMENTS:
None

Below is one more product that praises the product being talked about.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo monster truck, can also be used in any
    application where a 3x15mm button head screw is required

INCLUDES:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

Below is a terrific product that lots of others have actually bought at the very same time.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs enable a wide array of bodies
    to be used including rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

INCLUDES:
Front and Rear Body Installs and Publishes with Mounting Hardware

Many others have actually gotten this product along with the product that you are presently reviewing.

Black Esc Cage For Castle Sidewinder 3 & Sidewinder Sct Escs

This is the RPM ESC Cage for Castle Sidewinder 3
and Sidewinder SCT Electronic Speed Controls.

FEATURES:
Constructed of engineering grade nylon, black in color
Fits the following Castle Creations ESCs;
    010-0115-00, 010-0115-01, 010-0115-02, 010-0115-03, 010-0115-04
    010-0123-00
Allows ESC to be run with or without a fan
Fastens to chassis with two screws, whole assembly can be transfered
    from one vehicle to the next in about a minute
Separate switch mount bolts to cage, or might be installed anywhere by
    two 2mm holes
Fits the following Traxxas automobiles;
    Slash 2WD
    Slash 2wd LCG
    Slash 4×4,
    Slash 4×4 LCG
    Stampede 4x4
    Rally
Fits the following Traxxas automobiles when the Traxxas #3725 Mounting
    Plate is used;
    Rustler XL-5
    Stampede XL-5
    Outlaw XL-5

INCLUDES:
Unassembled ESC Cage with Hardware and Guideline Sheet
Separate On/Off Change Mount