Traxxas Bumper, Rear, X-Maxx

This is the Rear Bumper for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building

CONSISTS OF:
Rear Bumper

SPECIFICATIONS:
Length: 7.9" (202mm)
Height: 1.6" (41mm)

Regularly bought with the item that you are currently reviewing.

Bumper Mount, Front/ Bumper Support, X-Maxx

This is the Bumper Mount and Front Bumper Assistance
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building

CONSISTS OF:
One each; Bumper Mount and Front Bumper Assistance

Want an additional terrific item to compliment the above stated item?

Bumper Mount, Rear/ Bumper Support, X-Maxx

This is the Bumper Mount and Rear Bumper Assistance
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building

CONSISTS OF:
One each; Bumper Mount and Rear Bumper Assistance

Want an additional terrific item to compliment the above stated item?

Bumper, Front, X-Maxx

This is the Front Bumper for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
One-piece molded composite plastic building

CONSISTS OF:
Front Bumper

SPECIFICATIONS:
Length: 8.7" (222mm)
Height: 3.4" (87mm) measured at grille guard

Right here is a terrific item that numerous others have bought at the very same time.

Steering Blocks, Left & Right, X-Maxx

This is the Left and Right Guiding Blocks
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building
Holds stub axles in place, and links toe connect to guiding
    assembly

CONSISTS OF:
Left and Right Guiding Block

Right here is a terrific item that numerous others have bought at the very same time.

Caster Blocks (C-Hubs), Left & Right, X-Maxx

This is the Left and Right Caster Blocks
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building
Supports the driveshaft and stub axles, and is kept in place by the
    upper and lower suspension arms

CONSISTS OF:
Left and Right Caster Blocks

This item is frequently bought with the above stated item.

Rebuild Kit, Slipper Clutch (Steel Disc/Friction Insert/Spring/2

This is the Slipper Clutch Rebuild Package
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Restores like-new efficiency to worn slipper clutches

CONSISTS OF:
Steel Disc
Fiber Disc
Spring
Locknut
Pin
Guideline Sheet

The listed below item additionally sets really well with the item being talked about.

Steering Bellcranks/ Bellcrank Support/Servo Saver/ Servo Saver

These are the Steering Bellcranks
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building
Steel servo saver spring

CONSISTS OF:
Two Steering Bellcranks
Bellcrank Assistance
Servo Saver
Spring
Drag Link
Two 3x20mm Shoulder Screws

This item is frequently bought with the above stated item.

Toe Links, Molded Composite, 173Mm (158Mm Center To Center) (Bla

This is a set of Toe Hyperlinks for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building with steel ball cups
Links guiding assembly to each guiding block

CONSISTS OF:
Left and Right Toe Link

SPECIFICATIONS:
Total Length: 6.8" (173mm)
Length in between Ball Cup Centers: 6.2" (158mm)

This item is frequently bought with the above stated item.

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Package for the Consistent Velocity Driveshafts
    used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Steel building
Changes the pins and inserts that links the #7750 consistent
    speed driveshaft to the #7753 stub axle

CONSISTS OF:
Two each, Pins and Inserts

Regularly bought with the item that you are currently reviewing.

Carriers, Stub Axle (Left & Right), X-Maxx

These are the Left and Right Rear Stub Axle Carriers
for the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Molded composite plastic building
Holds the 15x24x4mm and 20x27x4mm ball bearings in place and
    supports the rear stub axles

CONSISTS OF:
Left and Right Rear Stub Axle Carriers