Traxxas F & R Bumper Mounts Screws

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.
These installs connect the bumpers to the bulkheads.

FEATURES:
Black nylon building and construction

CONSISTS OF:
One L&R Front Bumper Mount Set
One L&R Rear Bumper Mount Set
8 3x15mm round head machine screws

NEEDS:
Absolutely nothing. This is a direct replacement part.

COMMENTS:
Traxxas does not offer this part in aluminum. Duratrax provides 3
    different colors in aluminum, see stock numbers DTXC2725 - DTXC2732

Several others have actually acquired this thing along with the thing that you are presently checking out.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct kit for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Several others have actually acquired this thing along with the thing that you are presently checking out.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Replaces missing out on or harmed hex wheel hubs
Centers are made of molded black plastic
Axle pins are steel

CONSISTS OF:
Two Hex Wheel Centers
Two 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and putting wheel hubs in
    recessed location of axle providers (4932).

Frequently acquired with the thing that you are presently checking out.

Turnbckls 106Mm Frnt

These are the Stock Replacement Front Turnbuckles for the Traxxas T-Maxx 2.5.
These are the adjustable linking rods.

**For the front turnbuckles for the older T-Maxx use TRAC6338**

FUNCTIONS:
Thicker steel construction.

INCLUDES:
Two turnbuckles with pre-installed rod ends and balls.

REQUIRES:
Absolutely nothing. These are direct replacement rods.

SPECS:
Length: 108mm (4.25")
Density: 4mm (0.16")

Below is a terrific thing that lots of others have actually bought at the exact same time.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (crucial #4922) and the Bulkheads crucial #4930
and supplies defense to the front differential.

FEATURES:
Skidplate is constructed of high impact formed black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or tough landings from jumps.
Stainless steel installing plate supplies stiff installing surface.

INCLUDES:
One plastic front skidplate
One stainless-steel installing plate.

REQUIRES:
Installing on chassis with 4 3x10mm countersunk machine screws
    (not included, utilize TRAC3277).

This thing is frequently acquired with the above discussed thing.

RPM Long Body Mount Set (Blue) (2)

These are Long Blue Body mounts.
These are utilized on the Traxxas T-Maxx and the E-MAXX

FUNCTIONS:
These are plastic long body mounts.

INCLUDES:
Two Blue Shock Body mounts.
One Group RPM sticker.

REQUIRES:
Assembly onto the T-Maxx and E-Maxx

SPECIFICATIONS:
Length: 108.7 mm (4.2")
Diameter of post: 7mm (.279")

REMARKS:
These are to be utilized just with the RPM Shock Tower just. For the RPM
blue shock installs, utilize RPMC8010.

Below is one more thing that praises the thing being talked about.

Body Mount Posts

This is the Front Body Mount Posts, Rear Body Mount and 4 Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and install connect the body to the
    chassis

CONSISTS OF:
Two Front Body Mount Posts Rear Body Mount and 4 2.5 x 17mm screw
    pins

NEEDS:
Installing on chassis