Traxxas F & R Bumper Mounts Screws

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.
These mounts attach the bumpers to the bulkheads.

FEATURES:
Black nylon construction

INCLUDES:
One L&R Front Bumper Mount Set
One L&R Rear Bumper Mount Set
Eight 3x15mm round head machine screws

REQUIRES:
Absolutely nothing. This is a direct replacement part.

COMMENTS:
Traxxas does not offer this part in aluminum. Duratrax provides three
    different colors in aluminum, see stock numbers DTXC2725 - DTXC2732

Several others have actually acquired this product along with the product that you are currently checking out.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild set for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Several others have actually acquired this product along with the product that you are currently checking out.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Changes missing or harmed hex wheel hubs
Centers are made of molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Centers
2 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and positioning wheel hubs in
    recessed location of axle providers (4932).

Often acquired with the product that you are currently checking out.

Turnbckls 106Mm Frnt

These are the Stock Replacement Front Turnbuckles for the Traxxas T-Maxx 2.5.
These are the adjustable linking rods.

**For the front turnbuckles for the older T-Maxx usage TRAC6338**

FUNCTIONS:
Thicker steel construction.

INCLUDES:
2 turnbuckles with pre-installed rod ends and balls.

REQUIRES:
Absolutely nothing. These are direct replacement rods.

SPECS:
Length: 108mm (4.25")
Thickness: 4mm (0.16")

Below is a wonderful product that many others have actually bought at the exact same time.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (essential #4922) and the Bulkheads essential #4930
and supplies protection to the front differential.

FEATURES:
Skidplate is constructed of high effect formed black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or tough landings from jumps.
Stainless steel installing plate supplies stiff installing surface.

INCLUDES:
One plastic front skidplate
One stainless-steel installing plate.

REQUIRES:
Installing on chassis with four 3x10mm countersunk machine screws
    (not included, utilize TRAC3277).

This product is regularly acquired with the above discussed product.

RPM Long Body Mount Set (Blue) (2)

These are Long Blue Body mounts.
These are utilized on the Traxxas T-Maxx and the E-MAXX

FUNCTIONS:
These are plastic long body mounts.

INCLUDES:
2 Blue Shock Body mounts.
One Team RPM sticker.

REQUIRES:
Assembly onto the T-Maxx and E-Maxx

SPECIFICATIONS:
Length: 108.7 mm (4.2")
Diameter of post: 7mm (.279")

COMMENTS:
These are to be utilized just with the RPM Shock Tower just. For the RPM
blue shock mounts, utilize RPMC8010.

Below is an additional product that praises the product being talked about.

Body Mount Posts

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and mount attach the body to the
    chassis

INCLUDES:
2 Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw
    pins

REQUIRES:
Installing on chassis