Traxxas Bumper, Front/ Slash

This is the Front Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Front Bumper and bumper install

NEEDS:
Setup on the Traxxas Slash

Right here is a fantastic product that lots of others have actually bought at the same time.

Bumper, Rear/ Slash

This is the Back Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Back Bumper and bumper install

NEEDS:
Setup on the Traxxas Slash

Get this product to boost the one you are reading around.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Provides a protected connection for battery and motor connections

INCLUDES:
Two 2-Pin Male Ultra Plug
4 brief pieces of Black shrink tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This product is often purchased with the above pointed out product.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for better handling and higher
    catching speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Guidelines

Right here is a fantastic product that lots of others have actually bought at the same time.

Body Mounts Front & Rear

These are the replacement body installs for the Traxxas Stampede truck. They
are built of black plastic and are the posts that the lexan truck body
connects to.

PACKAGE
INCLUDES:
One front body install
One rear body install

COMMENTS:
Does not consist of body clips

Frequently purchased with the product that you are presently checking out.

Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to hold wheelie bar arm and wheels in
    location

INCLUDES:
Put together optional Wheelie Bar Mount with installing guidelines and
    hardware

NEEDS:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

Right here is a fantastic product that lots of others have actually bought at the same time.

Chassis, Slash

This is the Gray Nylon Chassis for the 2WD Traxxas Slash.

FEATURES:
Gray composite nylon building

INCLUDES:
One chassis for the Traxxas Slash

NEEDS:
Installing all elements onto the chassis

SPECS:
Length: 338mm (13.3")
Width: 189mm (7.44")
Height: 23mm (0.91")
Thickness: 0.08" (2mm)

Right here is one more product that compliments the product being reviewed.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

NEEDS:
Setup on the car