Traxxas Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in place
Gray in color, built of hardened plastic

INCLUDES:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Fastening to skidplate and differential

COMMENTS:
For the 3.3 variation just.

Want another terrific product to enhance the above mentioned product?

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.
This skidplate bolts to the Chassis (vital #4922) and the Bulkheads vital #4930
and supplies protection to the front differential.

FEATURES:
Skidplate is built of high impact molded black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or hard landings from jumps.
Stainless steel mounting plate supplies stiff mounting surface.

INCLUDES:
One plastic front skidplate
One stainless-steel mounting plate.

REQUIRES:
Setting up on chassis with four 3x10mm countersunk device screws
    (not included, utilize TRAC3277).

Get this product to boost the one you are reading around.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel building
Silver in color

INCLUDES:
2 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This product compliments the above talked about product.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle carriers and shocks
Black in color, built of hardened plastic

INCLUDES:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation just. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

This is a fantastic enhancement to the product currently being talked about.

Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FUNCTIONS:
Attaches to and protects chassis and supports the front bulkhead
Skidplate is gray in color

INCLUDES:
Skidplate and stainless-steel plate

REQUIRES:
Setting up on chassis with four 3x12mm countersunk device screws
    (not included, utilize TRAC2552

COMMENTS:
For the 3.3 variation just. For the initial T-Maxx Skidplate, order
    TRAC4037.

Regularly gotten with the product that you are currently reading about.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building

INCLUDES:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECS:
Size Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The below product likewise pairs truly well with the product being talked about.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Changes missing out on or damaged hex wheel hubs
Hubs are made of molded black plastic
Axle pins are steel

INCLUDES:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

REQUIRES:
Inserting pins through stub axles (4953) and putting wheel hubs in
    recessed location of axle carriers (4932).