Traxxas Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Rear Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

INCLUDES:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

NEEDS:
Installation on the Traxxas Revo

The below product additionally pairs really well with the product being gone over.

Chassis, E-Revo & Summit/ Foam

This is the Chassis for the Traxxas E-Revo 4WD Monster Truck RTR

FEATURES:
Nylon construction
Set up foam pads
Grey in color
Likewise fits the Traxxas E-Revo Brushless and Traxxas Top with small
    modification

INCLUDES:
One Chassis with foam pads
Guideline sheet for use with E-Revo Brushless and Top

NEEDS:
Installation of all other components

SPECS:
Length: 434mm (17")
Width: 150mm (5.9")
Height: 38mm (1.5")

Right here is another product that compliments the product being gone over.

Bulkhead Frnt L&R Halves Diff Retainer 4 X 14Mm Bc S (4) Rev

This is the Front Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

INCLUDES:
Front bulkhead halves Part #5330
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

NEEDS:
Installation on the Traxxas Revo

This is a great enhancement to the product presently being gone over.

Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo.

FEATURES:
Black plastic construction
"TRX" logo on front body install

INCLUDES:
Front and rear body mounts Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

NEEDS:
Installation on the Traxxas Revo

Want another terrific product to compliment the above pointed out product?

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

INCLUDES:
Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

NEEDS:
Installation on the Traxxas Revo

Want another terrific product to compliment the above pointed out product?

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

INCLUDES:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Guideline sheet

NEEDS:
2 plans had to complete truck

This product is regularly purchased with the above pointed out product.

Chassis Brace, Rear For Summit E-Revo

This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.

FEATURES:
Aluminum construction, blue in color

INCLUDES:
Rear Chassis Brace
2 3x35mm Socket Head Screws
One 4x14mm Button Head Screw
Guideline Sheet

SPECS:
Length: 5.1" (129mm)

The below product additionally pairs really well with the product being gone over.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal construction
Black in color

INCLUDES:
Six 4 x 12mm Countersunk Flathead Hex Screws

NEEDS:
Installation on the automobile

Several others have actually purchased this product together with the product that you are presently checking out.

Revo Wing Black, Includes Deca

This is the Black Wing for the Traxxas Revo 3.3.
This part attaches to the back of the body.

FEATURES:
Plastic construction, black in color

INCLUDES:
One rear wing with decals

NEEDS:
Installation on the Revo 3.3

SPECS:
Length: 8" (203.2mm)
Width: 3" (76.2mm)

COMMENTS:
Likewise available in white (TRAC9400) and exo-carbon (TRAC9447)