Traxxas Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
2 front bulkhead halves
Four 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Installation over front diff assembly

Frequently acquired with the product that you are currently reviewing.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Grey in color

CONSISTS OF:
One Chassis

REQUIRES:
Installation on automobile

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

This product compliments the above reviewed product.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Mounts
Four 2.5x18mm Cap Head Screws

REQUIRES:
Installation on the automobile

This product compliments the above reviewed product.

Suspension Pin Set (Front Or R

This is the Suspension Pin Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building
Silver in color

CONSISTS OF:
2 2x46mm Pins
Four 2x14mm Pins

REQUIRES:
Installation through suspension components

The below product also pairs actually well with the product being reviewed.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

REQUIRES:
Installation on the automobile

The below product also pairs actually well with the product being reviewed.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
2 Guiding Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Installation on the automobile

Right here is an additional product that compliments the product being reviewed.

Differential Assembly, Complet

This is the Total Differential Assembly for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.
Not for use on 1/10 scale vehicles.

FEATURES:
Steel and nylon building

CONSISTS OF:
One Total Differential Assembly

This product compliments the main item below.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Installation on the automobile

Several others have actually acquired this product along with the product that you are currently reviewing.

Bulkhead Tie Bars, Front & Rea

These are the Front and Rear Bulkhead Tie Bars for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Aluminum building
Blue in color

CONSISTS OF:
One Front Bulkhead Tie Bar
One Rear Bulkhead Tie Bar
One 2.5x6mm Cap Head Screw

REQUIRES:
Installation on the automobile

This product compliments the above reviewed product.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for use on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Battery Compartment Door
2 Vents

REQUIRES:
Installation on the automobile