Traxxas Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located between the bumper mounts.

FEATURES:
Black nylon building

CONSISTS OF:
Two Bulkhead Cross Braces
Eight 3x25mm round head screws

NEEDS:
Setup onto and E-Maxx.

SPECS:
Installing holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Want another wonderful thing to compliment the above pointed out thing?

Shock Tower

This is the Shock Tower for the all versions of the Traxxas T-Maxx.
This is for rectangular body posts.

FEATURES:
Plastic building

CONSISTS OF:
(1) Shock Tower

NEEDS:
Setup

SPECS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Density: 0.323" (8.2mm)

Lots of others have actually purchased this thing along with the thing that you are presently checking out.

Screws 3 X 15Mm Cntrsnk Mchn 6

These are countersunk Machine Screws from Traxxas.

FEATURES:
stainless-steel building
phillips drive
replacement screws utilized on the Traxxas LS-II

CONSISTS OF:
(6) Screws

SPECS:
Size: 3x15mm

COMMENTS:
when screwed-in the head of the screw is generally flush with
the surface

Get this thing to boost the one you are reading around.

Attachment Screws

    This is a Plan of 3x12x5mm Shoulder Screws for numerous
Traxxas Vehicles.

FEATURES:
Black steel building
Screws are half-threaded/half-smooth
Phillips head

CONSISTS OF:
6 3x12x5mm shoulder screws

SPECS:
Length: 12mm (.47")
Diameter: 3mm (.12")
Thread Length: 5mm (.20")

This thing is often purchased with the above pointed out thing.

Body Mount Posts

This is the Front Body Mount Posts, Rear Body Mount and 4 Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and install connect the body to the
    chassis

CONSISTS OF:
Two Front Body Mount Posts Rear Body Mount and 4 2.5 x 17mm screw
    pins

NEEDS:
Installing on chassis