Traxxas Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located in between the bumper mounts.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Bulkhead Cross Braces
Eight 3x25mm round head screws

REQUIRES:
Setup onto and E-Maxx.

SPECS:
Mounting holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Want another excellent thing to match the above discussed thing?

Shock Tower

This is the Shock Tower for the all versions of the Traxxas T-Maxx.
This is for rectangle-shaped body posts.

FEATURES:
Plastic building and construction

INCLUDES:
(1) Shock Tower

REQUIRES:
Setup

SPECS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Thickness: 0.323" (8.2mm)

Lots of others have actually acquired this thing in addition to the thing that you are currently checking out.

Screws 3 X 15Mm Cntrsnk Mchn 6

These are countersunk Device Screws from Traxxas.

FEATURES:
stainless steel building and construction
phillips drive
replacement screws used on the Traxxas LS-II

INCLUDES:
(6) Screws

SPECS:
Size: 3x15mm

REMARKS:
when screwed-in the head of the screw is generally flush with
the surface

Get this thing to enhance the one you are reading around.

Attachment Screws

    This is a Package of 3x12x5mm Shoulder Screws for many
Traxxas Vehicles.

FEATURES:
Black steel building and construction
Screws are half-threaded/half-smooth
Phillips head

INCLUDES:
Six 3x12x5mm shoulder screws

SPECS:
Length: 12mm (.47")
Size: 3mm (.12")
Thread Length: 5mm (.20")

This thing is often acquired with the above discussed thing.

Body Mount Posts

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and mount connect the body to the
    chassis

INCLUDES:
Two Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw
    pins

REQUIRES:
Setting up on chassis