Traxxas Box, Reciever (Sealed)/ Foam Pads/ 2.5X12mm Cs (2)/ 3X6mm Cs (2)

This is the Receiver Box for the 1/10 scale Traxxas Rally Race Car.

FEATURES:
Plastic construction, black in color

CONSISTS OF:
Upper and lower Case Halves with Wire Cover
Gasket
Two Foam Pads
Two 3x12mm Button Head Cap Screws
Two 3x6mm Button Head Cap Screws
Two 2.5x12mm Cap Screws
Direction Sheet

SPECIFICATIONS:
Box Dimensions: 1.6 x 1.7 x 2.1" (41 x 43 x 54.5mm)

Get this thing to enhance the one you are reading around.

300Mm Light Extension Cable (Jr)

HYPERION 300MM LIGHT EXTENSION CABLE (JR)

This thing compliments the main item here.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt guards

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside size: 6mm
Outdoors size: 12mm
Width: 4mm

COMMENTS:
This bearing set is used in the transmission and differentials of
    the Revo.

You will certainly enjoy this product if you have the product previously stated.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Crawler Brushed Motor.

FEATURES:
High-strength updated ferrite magnets
Legal for rock crawling competitors
Entirely rebuildable
Double accuracy ball bearings
120 day minimal service warranty

CONSISTS OF:
Tekin T35 HD 35 Turn Rock Crawler Brushed Motor

REQUIRES:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending upon automobile

SPECIFICATIONS:
Input Voltage: THREE LiPo or 10-cell NiMH battery
Dimensions: 2.07 x 1.42" (52.7 x 36mm)
Shaft Diameter: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)