Traxxas Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon building
Helps avoid the body install hole from cracking too soon
White in color

SPECIFICATIONS:
Outer Diameter: 0.87" (22mm)
Inner Diameter: 0.26" (6.7mm)

CONSISTS OF:
Eight large body install washers

Lots of others have acquired this thing in addition to the thing that you are currently checking out.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural sleek color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Here is a great thing that several others have bought at the very same time.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Want an additional great thing to enhance the above mentioned thing?

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Building
Silver in Color
Bent for Easy Removal

CONSISTS OF:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Vehicle

Here is an additional thing that compliments the thing being discussed.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Sturdy Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic building

CONSISTS OF:
2 Ouput Yokes
2 Screw Pins

Want an additional great thing to enhance the above mentioned thing?

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on vehicle

You will certainly enjoy this item if you have the item previously discussed.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for models with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Want an additional great thing to enhance the above mentioned thing?

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the equipment which is connected directly to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 13 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This equipment is just one of two which are used on the E-Maxx double motor
    set-up.

Get this thing to improve the one you are reading around.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring equipment
One pinion equipment

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This thing compliments the above discussed thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93