Traxxas Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon construction
Assists prevent the body install hole from cracking prematurely
White in color

SPECS:
Outer Diameter: 0.87" (22mm)
Inner Diameter: 0.26" (6.7mm)

INCLUDES:
8 large body install washers

Numerous others have purchased this item in addition to the item that you are presently reviewing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel construction
Natural refined color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

Below is a excellent item that many others have bought at the very same time.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

INCLUDES:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Want an additional excellent item to match the above discussed item?

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Construction
Silver in Color
Bent for Easy Elimination

INCLUDES:
Ten Bent Silver Metal Body Clips

NEEDS:
Assembly onto Automobile

Below is an additional item that praises the item being gone over.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Heavy Duty Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic construction

INCLUDES:
2 Ouput Yokes
2 Screw Pins

Want an additional excellent item to match the above discussed item?

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on vehicle

You will enjoy this item if you have the item just above stated.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for designs with a slipper clutch.
Black plastic construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Want an additional excellent item to match the above discussed item?

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 13 tooth Pinion Equipment
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of two which are used on the E-Maxx dual motor
    set-up.

Get this item to enhance the one you read around.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

INCLUDES:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This item praises the above gone over item.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93