Traxxas Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon building
Assists prevent the body install hole from splitting prematurely
White in color

SPECS:
Outer Diameter: 0.87" (22mm)
Inner Diameter: 0.26" (6.7mm)

CONSISTS OF:
Eight large body install washers

Many others have actually gotten this item together with the item that you are currently checking out.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural polished color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Here is a excellent item that numerous others have actually bought at the exact same time.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be utilized on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Want another excellent item to enhance the above pointed out item?

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Construction
Silver in Color
Bent for Easy Removal

CONSISTS OF:
10 Bent Silver Metal Body Clips

NEEDS:
Assembly onto Vehicle

Here is another item that compliments the item being discussed.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Sturdy Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic building

CONSISTS OF:
2 Ouput Yokes
2 Screw Pins

Want another excellent item to enhance the above pointed out item?

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

You will like this product if you have the product above mentioned.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for models with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Want another excellent item to enhance the above pointed out item?

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the gear which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

CONSISTS OF:
One 13 tooth Pinion Equipment
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is only one of two which are utilized on the E-Maxx dual motor
    set-up.

Get this item to boost the one you read around.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This item compliments the above discussed item.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93