JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.


Model: Traxxas 3766A
Dist. #: TRA3766A   SKU: TRA3766A

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

West Jordan, UT
Available Now!

List Price:  $3.00
Price:  $2.99 + $2.99 shipping
You Save:  $0.01 (0%)
Updated on Nov 24, 2017 04:56:25 AM

Body Ultra Shock XXL Gray (2)...
These are the Shock Bodies for the Traxxas Ultra Shocks (TRAC3762)
used on the Traxxas T-Maxx 3.3.

FUNCTIONS:
Molded Composite
Gray in Color

INCLUDES:
(2) Bodies

REQUIRES:
Setup

SPECS:
Length: 1.777" (45.1mm)
Diameter: 0.521" (13.2mm)

Numerous others have gotten this product in addition to the product that you are currently checking out.

Gearbox Halves L&R Grey

This is a Left and Right Gearbox half with Idler Shaft for the
Traxxas Stampede and Traxxas Rustler.

FEATURES:
Gray plastic building and construction
Steel idler shaft

INCLUDES:
One gearbox
One idler shaft

REMARKS:
This part fit the requirement and XL variation of both the Stampede
and Rustler.

Below is an additional product that compliments the product being reviewed.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon building and construction

INCLUDES:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

REQUIRES:
Other shock components

SPECS:
Diameter Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

This product compliments the main item right here.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
place over the shock body and the piston heads that manage the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on a lot of Traxxas nitro and electric powered vehicles.
Two hole piston moving towards higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

The below product likewise sets actually well with the product being reviewed.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel building and construction

INCLUDES:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

REQUIRES:
Setup on the Rustler, Stampede or Outlaw

REMARKS:
For a complete suspension pin set order TRAC4940

This is a superb addition to the product currently being reviewed.

Re Bearing Carriers Rstlr/Stmpd/Slsh

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two rear bearing (center) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

Frequently Bought Together

Traxxas Body Ultra Shock Xxl Grey (2)
+
Traxxas Plastic Shock Caps & Bottoms
+
Traxxas Gearbox Halves L&R Grey
This Item: Traxxas Body Ultra Shock Xxl Grey (2)
$2.99
Traxxas Plastic Shock Caps & Bottoms
$2.99
Traxxas Gearbox Halves L&R Grey
$7.99

Total Price: $13.97

Add All Three To Cart
Visual Parts Finder
What's New?
Weller Single Flat Tip, 3/16"
$6.83
$2.99 SHIPPING


WELETDD