Traxxas Slash 4X4 Body

This is the Brief Course Racing Truck Clear Body
for the Traxxas 4x4 Slash and Slayer.

FEATURES:
Cut and all set to paint
Clear protective coating on beyond body

INCLUDES:
Clear Brief Course Racing Truck Body with Window Masks, Sponsor and
    Body Trim Decals

NEEDS:
Spray or brush-on polycarbonate safe paint

SPECIFICATIONS:
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

Regularly purchased with the thing that you are currently reading about.



Here is one more thing that praises the thing being gone over.



This thing praises the above gone over thing.



Regularly purchased with the thing that you are currently reading about.

Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

This is the Air Conditioning Powered Traxxas EZ-Peak 100W Dual Battery Battery charger
with iD Car Battery Identification.

FEATURES:
Charges TWO and THREE LiPo batteries
5-8 cell NiMH batteries
Traxxas's iD technology automatically sets up and optimizes charge
    settings for Traxxas iD geared up batteries
Charges 2 batteries all at once at up to 50W (4 amps) each, or
    charges single battery at 100W (8 amp) output in High-Output
    mode
Charges a NiMH and LiPo at the very same time
Advanced Mode for full manual control of battery charger settings
Development bar and audible notifies
Storage Mode prepares LiPo batteries for extended storage
1 Month minimal warranty through Traxxas starting at date of
    purchase

INCLUDES:
Traxxas EZ-Peak 100W Dual Battery Battery charger with Air Conditioning Power Cable,
    Instructions, Cooling Fan

SPECIFICATIONS:
Input Power: 100-240V/50-60Hz
Output: 100W max
Charge Current: 1-4A (double mode), 5-8A (high output mode)
Discharge Current Variety: 500mA
Existing Drain for Balance Ports: 500mA
Weight: 20.3oz (575g)
Measurements: 7 x 5.4 x 2.2" (176 x 138 x 57mm)

The below thing likewise pairs actually well with the thing being gone over.

Pinion Gear, Differential (Front), X-Maxx

This is the Pinion Equipment for the Front Differential
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Solidified steel building and construction

INCLUDES:
Pinion Equipment for the Front Differential

This is a amazing enhancement to the thing currently being gone over.

Pinion Gear, Differential (Rear), X-Maxx

This is the Pinion Equipment for the Back Differential
for the Traxxas X-Maxx Beast Truck, TRAD75**.

FEATURES:
Solidified steel building and construction

INCLUDES:
Pinion Equipment for Back Differential

Several others have actually purchased this thing in addition to the thing that you are currently reading about.



This is the 2.4GHz radio controlled, electrical powered, all set to run, Traxxas
Slash Short Course Race Truck.

**The suched as TQ 2.4GHz radio system works just with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES:
Chassis: Modified tub 0.08" (2mm) thick composite nylon with side
    nerf bars to impact and support body
Drive: Rear wheel
Motor: Titan 12 turn 550 size customized with internal cooling fan
Battery: 7-cell 3000mAh NiMH with Traxxas HD adapter, and iD
    Car Battery Recognition that permits Traxxas iD geared up
    battery chargers to automatically set and optimize charge settings
Battery Battery charger: 4A DC powered fast battery charger
Transmission: Brushless all set Magnum 272 metal-gear with ball
    bearings
Slipper Clutch: Revo-spec Torque-Control system
Differential: Planetary type with hardened steel gears
Ball Bearings: Rubber sealed
Main Equipment: Plastic, 48 pitch 86 tooth
Pinion Equipment: Metal, 48 pitch 18 tooth
Radio: Traxxas TQ 2.4GHz high output with Traxxas Link automatic
    design recognition, 3-ch receiver
Radio Box: Sealed and watertight for driving through water, mud, and
    snow
Electronic Speed Control: Traxxas XL-5 watertight, with reverse and
    brake, and Traxxas high current adapter
Shocks: Adjustable Ultra shocks with X-ring technology, oil-filled
    plastic body
Wheels: 1.5" (38mm) broad, 2.2" (56mm) size 5-spoke satin surface
Tires: All surface with foam inserts 1.8" (46mm) broad, 4.25" (108mm)
    external size
Bumpers: Scale front and rear tube design
Body: Molded from Lexan, trimmed and prepainted
Suspension: Four wheel independent
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation
    to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle

INCLUDES:
Traxxas Slash Short Course Race Truck w/TQ 2.4GHz radio system, ESC,
    body, motor, 7-cell 3000mAh NiMH battery, DC powered battery charger,
    decals and illustrated instruction manual

NEEDS:
AA Batteries: Four for transmitter
Track devices

SPECIFICATIONS:
Automobile-
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 8.42" (214mm)
Front and Rear Track: 11.65" (296mm) distance between external edges
    of wheels
Wheelbase: 13.2" (335mm)
Ground Clearance: 3.5" (89mm)
Weight: 76.2oz (2.16kg)
    Body-
Length: 21.3" (542mm)
Width: 11.4" (289mm)
Height: 5.3" (135mm)
Height: 5.3" (135mm)

REMARKS:
Available in the following color mixes;
    Blue #1 TRAD47BB
    Blue & Orange #25, TRAD47BN, Arie Luyendyk Jr.
    Blue & Red, TRAD47BR
    Pink, TRAD47KK
    Black & Red #9, TRAD47LR, Chad Hord
    Orange #7, TRAD47NN, Robbie Gordon
    Red & Black #25, TRAD47RL, Mark Jenkins

Though the Traxxas Slash is readily available in race reproduction versions
with formally licensed ProGraphix painted bodies, we are not able to
honor specific requests.

The ball bearings in the Traxxas Slash 2WD are rubber closed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax;
    Qty. Size Place Qty Bearing Set Qty Bearing Set
4 5x11mm Steering Obstructs 2 DTXC1547 2 TRAC5116
4 5x8mm Bellcrank 2 DTXC1523 2 TRAC6728
4 5x11mm R Stub Axles 2 DTXC1547 2 TRAC5116
1 5x11mm Spur Equipment 1 DTXC1547 1 TRAC5116
4 5x11mm Transmission 2 DTXC1547 2 TRAC5116