Traxxas Body Mounts Front & Rear

These are the replacement body installs for the Traxxas Stampede truck. They
are constructed of black plastic and are the posts that the lexan truck body
attaches to.

PACKAGE
CONSISTS OF:
One front body install
One rear body install

REMARKS:
Does not include body clips

Below is one more product that praises the product being reviewed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to avoid automobile from turning over
    during wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with installing instructions and
    hardware

NEEDS:
Securing to rear of chassis

Below is a wonderful product that lots of others have bought at the exact same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Many others have bought this product in addition to the product that you are currently reviewing.

Aluminum Front Skid Plate, Red, For Traxxas Stampede

This is the optional ST Racing Front Skid Plate in Red
for the Traxxas 1/10 scale Electric Stampede.

FEATURES:
CNC machined aluminum
Changes stock plastic front skid plates

CONSISTS OF:
ST Racing Front Skid Plate in Red with Installing Screws

Want one more wonderful product to compliment the above stated product?

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for much better handling and greater
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Instructions

Below is a wonderful product that lots of others have bought at the exact same time.

Battery, Power Cell (Nimh, 6-C Stick) W/Std Connec Tor

This is the 7.2V NiMH 1500mAh Stick Battery Load from Traxxas.

FEATURES:
Stick configuration
14-gauge wire
Standard connector

CONSISTS OF:
One 7.2V NiMH 1500mAh Stick Battery Load

NEEDS:
A peak-detecting battery charger rated for NiMH batteries

SPECIFICATIONS:
Length: 134mm (5.3")
Width: 47mm (1.9")
Height: 24mm (0.94")

Below is a wonderful product that lots of others have bought at the exact same time.

30T Idler Gear Steel

This is the optional Steel Idler Gear for many Traxxas Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One steel 30T idler gear

NEEDS:
Installation on automobile

This product is regularly bought with the above stated product.

Large Servo Saver

This is a big servo saver that can be used in Traxxas cars or any vehicle that
needs a big style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that permit you to install the saver
on many popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the guiding linkages.