Traxxas Body Mounts Front & Rear

These are the replacement body mounts for the Traxxas Stampede truck. They
are built of black plastic and are the posts that the lexan truck body
connects to.

PACKAGE
CONSISTS OF:
One front body mount
One rear body mount

COMMENTS:
Does not consist of body clips

Here is another thing that praises the thing being reviewed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to prevent vehicle from turning over
    during wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with mounting instructions and
    hardware

NEEDS:
Attaching to back of chassis

Here is a excellent thing that lots of others have actually bought at the exact same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for models with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Many others have actually gotten this thing along with the thing that you are currently reading about.

Aluminum Front Skid Plate, Red, For Traxxas Stampede

This is the optional ST Racing Front Skid Plate in Red
for the Traxxas 1/10 scale Electric Stampede.

FEATURES:
CNC machined aluminum
Changes stock plastic front skid plates

CONSISTS OF:
ST Racing Front Skid Plate in Red with Mounting Screws

Want another excellent thing to compliment the above mentioned thing?

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for better handling and higher
    catching speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Instructions

Here is a excellent thing that lots of others have actually bought at the exact same time.

Battery, Power Cell (Nimh, 6-C Stick) W/Std Connec Tor

This is the 7.2V NiMH 1500mAh Stick Battery Load from Traxxas.

FEATURES:
Stick setup
14-gauge wire
Standard port

CONSISTS OF:
One 7.2V NiMH 1500mAh Stick Battery Load

NEEDS:
A peak-detecting charger rated for NiMH batteries

SPECS:
Length: 134mm (5.3")
Width: 47mm (1.9")
Height: 24mm (0.94")

Here is a excellent thing that lots of others have actually bought at the exact same time.

30T Idler Gear Steel

This is the optional Steel Idler Gear for lots of Traxxas Vehicles.

FEATURES:
Steel construction

CONSISTS OF:
One steel 30T idler gear

NEEDS:
Installation on vehicle

This thing is frequently gotten with the above mentioned thing.

Large Servo Saver

This is a large servo saver that can be used in Traxxas vehicles or any car that
needs a large style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that permit you to mount the saver
on many popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the steering linkages.