Traxxas Body Mount Posts

This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins
for the Traxxas T-Maxx 3.3R.

FEATURES:
Constructed of plastic these posts and install connect the body to the
    chassis

INCLUDES:
2 Front Body Mount Posts Rear Body Mount and four 2.5 x 17mm screw
    pins

REQUIRES:
Setting up on chassis

This item praises the above reviewed item.

Shock Tower

This is the Shock Tower for the all variations of the Traxxas T-Maxx.
This is for rectangle-shaped body posts.

FEATURES:
Plastic construction

INCLUDES:
(1) Shock Tower

REQUIRES:
Setup

SPECIFICATIONS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Thickness: 0.323" (8.2mm)

This is a fantastic addition to the item presently being reviewed.

Ez Start Quick Connector

This is the stock replacement Quick Adapter set for the Traxxas EZ Start.

FEATURES:
All wires included in an EZ beginning system

INCLUDES:
One complete Wire Set with connectors
2 zip ties
One adhesive foam pad

REQUIRES:
The remainder of the EZ Beginning system.

COMMENTS:
This does not consist of the adapter and box which attaches to the
    7.2V battery pack for use on the EZ beginning system. (TRAP4580)

Here is one more item that praises the item being reviewed.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located in between the bumper mounts.

FEATURES:
Black nylon construction

INCLUDES:
2 Bulkhead Cross Braces
8 3x25mm round head screws

REQUIRES:
Setup onto and E-Maxx.

SPECIFICATIONS:
Installing holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Want one more terrific item to compliment the above discussed item?

F & R Bumper Mounts Screws

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.
These installs connect the bumpers to the bulkheads.

FEATURES:
Black nylon construction

INCLUDES:
One L&R Front Bumper Mount Set
One L&R Rear Bumper Mount Set
8 3x15mm round head machine screws

REQUIRES:
Nothing. This is a direct replacement part.

COMMENTS:
Traxxas does not provide this part in aluminum. Duratrax provides three
    various colors in aluminum, see stock numbers DTXC2725 - DTXC2732

Frequently acquired with the item that you are presently checking out.

3 X 10 Mm Cst Screws (6)

These are 3x10mm Countersunk Self-Tapping Screws from Traxxas.

FEATURES:
Steel construction
Phillips drive insert
Countersunk and self-tapping
Replacement parts created for the Traxxas Nitro Hawk

INCLUDES:
(6) Screws

SPECIFICATIONS:
Diameter: 3mm
Length: 10mm

Get this item to boost the one you read around.

3 X 10 Mm Csm Screws (6)

This is a set of 3x10mm Countersunk machine screws for the Traxxas Nitro Hawk.

FEATURES:
Metal construction
Countersunk (flat head) machine screws
Phillips drive insert
Replacement parts created for the Traxxas Nitro Hawk

INCLUDES:
6 Screws

SPECIFICATIONS:
Length: 10mm
Diameter: 3mm

Get this item to boost the one you read around.

Attachment Screws

    This is a Plan of 3x12x5mm Shoulder Screws for lots of
Traxxas Vehicles.

FEATURES:
Black steel construction
Screws are half-threaded/half-smooth
Phillips head

INCLUDES:
6 3x12x5mm shoulder screws

SPECIFICATIONS:
Length: 12mm (.47")
Diameter: 3mm (.12")
Thread Length: 5mm (.20")