Traxxas Bearings: 4X8mm (2), 6X10mm (8), 8X12mm (5)

This is the optional Ball Bearing Set for the
for the Latrax Rally Vehicle from Traxxas.

FEATURES:
Steel building provides smoother operation and longer life than
    bushings
Replaces all bushings used in the center carriers, diff assembly,
    and driveshaft

CONSISTS OF:
Two 4x8x3mm Ball Bearings
Eight 6x10x3mm Ball Bearings
5 8x12x3.5mm Ball Bearings

This is a amazing enhancement to the product presently being discussed.

Differential Assembly, Complete (Gear)

This is the Total Diff Gear Set
for the Latrax Rally Vehicle from Traxxas, TRAD90**.

FEATURES:
Replaces worn differential gears

CONSISTS OF:
Two Diff Output Gears
4 Spider gears
35T Ring Gear
2x14.8mm Steel Pin
Two Sleeves

This product is often acquired with the above mentioned product.

Suspension Arms, Front/Rear (2)

These are the Front or Rear Suspension Arms
for the LaTrax Teton Monster Truck from Traxxas, TRAD76**.

FEATURES:
Composite plastic building
Fastens to front or rear bulkheads

CONSISTS OF:
Two Front or Rear Suspension Arms

Numerous others have acquired this product together with the product that you are presently checking out.

Shock Tower, Front (1), Rear (1)/ Shock Tower Brace (2)

These are the Front and Rear Shock Towers for the
LaTrax Teton Monster Truck from Traxxas.

FEATURES:
Molded plastic building, blue in color

CONSISTS OF:
Front and Rear Shock Tower with black plastic Braces

Numerous others have acquired this product together with the product that you are presently checking out.

Driveshaft Assembly, Front Or Rear (2)

These are the Front or Rear Driveshaft Assemblies
for the LaTrax Teton Monster Truck from Traxxas, TRAD76**.

FEATURES:
Composite plastic building
Transfers power from differentials to wheels

CONSISTS OF:
Two Front or Rear Driveshaft Assemblies

REMARKS:
For Center Driveshaft, order TRAC9806.

Frequently acquired with the product that you are presently checking out.



This is the Duratrax Onyx 7.4V 2000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale automobile applications
Prewired with Traxxas high current port

CONSISTS OF:
7.4V 2000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Rated Capability: 2000mAh
Release Rating: 25C constant
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.7oz (105g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 15Wh

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER dismantle or modify pack wiring in any method or puncture cells
NEVER place on combustible products or leave unattended throughout
    charging
ALWAYS Charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm