Traxxas Bearings: 4X8mm (2), 6X10mm (8), 8X12mm (5)

This is the optional Ball Bearing Set for the
for the Latrax Rally Automobile from Traxxas.

FEATURES:
Steel building and construction provides smoother operation and longer life than
    bushings
Replaces all bushings used in the center carriers, diff assembly,
    and driveshaft

CONSISTS OF:
2 4x8x3mm Ball Bearings
Eight 6x10x3mm Ball Bearings
5 8x12x3.5mm Ball Bearings

This is a great enhancement to the product currently being talked about.

Differential Assembly, Complete (Gear)

This is the Complete Diff Gear Set
for the Latrax Rally Automobile from Traxxas, TRAD90**.

FUNCTIONS:
Replaces worn differential gears

CONSISTS OF:
2 Diff Output Gears
4 Spider gears
35T Ring Gear
2x14.8mm Steel Pin
2 Sleeves

This product is often acquired with the above discussed product.

Suspension Arms, Front/Rear (2)

These are the Front or Rear Suspension Arms
for the LaTrax Teton Beast Truck from Traxxas, TRAD76**.

FUNCTIONS:
Composite plastic building and construction
Fastens to front or rear bulkheads

CONSISTS OF:
2 Front or Rear Suspension Arms

Many others have acquired this product in addition to the product that you are currently reviewing.

Shock Tower, Front (1), Rear (1)/ Shock Tower Brace (2)

These are the Front and Rear Shock Towers for the
LaTrax Teton Beast Truck from Traxxas.

FEATURES:
Molded plastic building and construction, blue in color

CONSISTS OF:
Front and Rear Shock Tower with black plastic Braces

Many others have acquired this product in addition to the product that you are currently reviewing.

Driveshaft Assembly, Front Or Rear (2)

These are the Front or Rear Driveshaft Assemblies
for the LaTrax Teton Beast Truck from Traxxas, TRAD76**.

FUNCTIONS:
Composite plastic building and construction
Transfers power from differentials to wheels

CONSISTS OF:
2 Front or Rear Driveshaft Assemblies

REMARKS:
For Center Driveshaft, order TRAC9806.

Often acquired with the product that you are currently reviewing.



This is the Duratrax Onyx 7.4V 2000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale car applications
Prewired with Traxxas high existing connector

CONSISTS OF:
7.4V 2000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 7.4V
Rated Capacity: 2000mAh
Discharge Score: 25C continuous
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.7oz (105g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 15Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or customize pack wiring in any way or puncture cells
NEVER put on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm