Traxxas Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FUNCTIONS:
Stainless Steel bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside size: 6mm (0.24")
Outdoors size: 13mm (0.51")
Width: 5mm (0.20")

Right here is a wonderful item that numerous others have bought at the exact same time.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

CONSISTS OF:
Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Needs
4 Overall of these Bearings.

This item is frequently gotten with the above pointed out item.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Fully put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Connects to the differential with one screw pin
Functions on the front or back, right or left of car

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Direction sheet

NEEDS:
Setting up on chassis

Right here is one more item that praises the item being talked about.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
use on the Traxxas Revo series.

FEATURES:
Nylon Building
Black in Color
Permits Oversized Bearing utilize

CONSISTS OF:
One Left Axle Provider
One Right Axle Provider
4 Dust Boot Retainers
Two Bearing Spacers

NEEDS:
Installation

This item praises the above talked about item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly love this thing if you have the thing previously stated.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Direction sheet

NEEDS:
Two bundles had to finish truck

This item praises the main item right here.



This is the replacement Steering Block L&R for
use with the Associated RC10GT2.

FEATURES:
Nylon Building
Black in Color

CONSISTS OF:
One Left Steering Block
One Right Steering Block

NEEDS:
Installation

You will certainly love this thing if you have the thing previously stated.



This is the replacement 30 Degree Caster Block for the Group Associated
RC10GT2 Factory Team.
This will also work as a replacement for the 25 Degree Blocks - ASCC7919
that had the RC10GT2 RTR

FUNCTIONS:
Composite nylon building, black in color
Replaces worn or broken caster blocks

CONSISTS OF:
Two 30 degree caster blocks

NEEDS:
Installation following the design handbook