Traxxas Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FEATURES:
Stainless Steel bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside diameter: 6mm (0.24")
Outside diameter: 13mm (0.51")
Width: 5mm (0.20")

Right here is a excellent item that lots of others have actually bought at the very same time.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building and construction
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Within the Wheel Centers, the Truck Needs
Four Total of these Bearings.

This item is often bought with the above mentioned item.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Totally put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Attaches to the differential with one screw pin
Works on the front or rear, right or left of vehicle

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Direction sheet

NEEDS:
Installing on chassis

Right here is another item that praises the item being gone over.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
use on the Traxxas Revo series.

FEATURES:
Nylon Building and construction
Black in Color
Enables Oversized Bearing use

INCLUDES:
One Left Axle Provider
One Right Axle Provider
Four Dust Boot Retainers
Two Bearing Spacers

NEEDS:
Setup

This item praises the above gone over item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will like this product if you have the product above mentioned.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

INCLUDES:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Direction sheet

NEEDS:
Two packages had to finish truck

This item praises the main item right here.



This is the replacement Steering Block L&R for
use with the Associated RC10GT2.

FEATURES:
Nylon Building and construction
Black in Color

INCLUDES:
One Left Steering Block
One Right Steering Block

NEEDS:
Setup

You will like this product if you have the product above mentioned.



This is the replacement 30 Degree Caster Block for the Team Associated
RC10GT2 Factory Team.
This will likewise work as a replacement for the 25 Degree Blocks - ASCC7919
that featured the RC10GT2 RTR

FEATURES:
Composite nylon construction, black in color
Changes worn or damaged caster obstructs

INCLUDES:
Two 30 degree caster obstructs

NEEDS:
Setup following the design handbook