Traxxas Battery Hold-Downs, Tall (2) (Allows For Installation Of Taller

This is the Battery Hold-downs and Tall Retainers
for the Traxxas 1/10 Rally VXL rally car

FUNCTIONS:
Made from black plastic.

INCLUDES:
One battery hold-down
One tall front hold-down retainer
One tall rear hold-down retainer

SPECS:
hold-down, length: 7-5/8" (194mm)
width: 1-1/4" (32mm)
height: 3/8" (10mm)
front retainer, length: 46mm (1-13/16")
width: 50mm (2")
density: 8.5mm (5/16")
rear retainer, length: 48mm (1-7/8")
width: 42mm (1-5/8")
density: 17mm (11/16")

COMMENTS:
The tall hold-down retainers enable the use of taller,
multi-cell batteries.

Frequently acquired with the product that you are presently reviewing.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/10 scale car applications
Prewired with Traxxas high present port

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capacity: 5000mAh
Discharge Score: 25C constant
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER enable to Discharge listed below 2.5V per cell
NEVER dismantle or modify pack circuitry in any method or leak cells
NEVER place on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY shut out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This product is often acquired with the above stated product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This is a amazing enhancement to the product presently being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

REQUIRES:
Installation on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

COMMENTS:
Likewise available in Black (RPMC0702)

The below product additionally sets actually well with the product being talked about.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to link in reverse
Textured surface for simple gripping
Compatible with high-current 12-gauge wire
Safe and secure positive locking spring crammed terminals for constant
    contact
Several locking barbs keep terminals secure

INCLUDES:
Two black male plastic connectors
Two sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins