Traxxas Battery Hold-Downs, Tall (2) (Allows For Installation Of Taller

This is the Battery Hold-downs and Tall Retainers
for the Traxxas 1/10 Rally VXL rally car

FUNCTIONS:
Made from black plastic.

INCLUDES:
One battery hold-down
One tall front hold-down retainer
One tall rear hold-down retainer

SPECS:
hold-down, length: 7-5/8" (194mm)
width: 1-1/4" (32mm)
height: 3/8" (10mm)
front retainer, length: 46mm (1-13/16")
width: 50mm (2")
density: 8.5mm (5/16")
rear retainer, length: 48mm (1-7/8")
width: 42mm (1-5/8")
density: 17mm (11/16")

REMARKS:
The tall hold-down retainers enable the use of taller,
multi-cell batteries.

Regularly acquired with the thing that you are presently reading about.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Traxxas high existing connector

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Rated Capability: 5000mAh
Discharge Score: 25C continuous
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER take apart or customize pack electrical wiring in any way or puncture cells
NEVER place on flammable materials or leave unattended during
    charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This thing is often acquired with the above discussed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This is a fantastic addition to the thing presently being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

REQUIRES:
Installation on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

REMARKS:
Likewise readily available in Black (RPMC0702)

The below thing likewise sets really well with the thing being discussed.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FUNCTIONS:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to link backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protected positive locking spring loaded terminals for constant
    contact
Multiple locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic ports
Two sets of gold metal pins
Instruction sheet

REQUIRES:
Soldering wires to the metal pins