Traxxas Battery Hold-Downs, Tall (2) (Allows For Installation Of Taller

This is the Battery Hold-downs and Tall Retainers
for the Traxxas 1/10 Rally VXL rally vehicle

FEATURES:
Made of black plastic.

INCLUDES:
One battery hold-down
One tall front hold-down retainer
One tall rear hold-down retainer

SPECIFICATIONS:
hold-down, length: 7-5/8" (194mm)
width: 1-1/4" (32mm)
height: 3/8" (10mm)
front retainer, length: 46mm (1-13/16")
width: 50mm (2")
density: 8.5mm (5/16")
rear retainer, length: 48mm (1-7/8")
width: 42mm (1-5/8")
density: 17mm (11/16")

REMARKS:
The tall hold-down retainers allow for the usage of taller,
multi-cell batteries.

Frequently acquired with the product that you are currently reviewing.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Perfect for 1/10 scale vehicle applications
Prewired with Traxxas high present connector

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 11.1V
Ranked Capacity: 5000mAh
Discharge Rating: 25C constant
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER permit to Discharge below 2.5V per cell
NEVER dismantle or modify pack wiring in any way or puncture cells
NEVER put on flammable materials or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This product is frequently acquired with the above pointed out product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This is a great addition to the product currently being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Blue in color
Plastic constrution

INCLUDES:
(2) Front/Rear A-Arms

NEEDS:
Installation on front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

REMARKS:
Also offered in Black (RPMC0702)

The below product additionally sets actually well with the product being talked about.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to connect in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Safe and secure positive locking spring loaded terminals for constant
    contact
Several locking barbs keep terminals protect

INCLUDES:
2 black male plastic ports
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins