JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Traxxas Battery 6-Cell Nimh W/Molex (Fits Latrax 1/18 Models) (Traxxas 2925A | TRA2925A)

Model: Traxxas 2925A
Dist. #: TRA2925A   SKU: TRA2925A

Be the first to review this product. (Write Review)

Out of stock

Price:  $19.95

This item will earn you 20 reward point(s).
20 points = $0.40 off your next order. Learn More

Updated on Mar 28, 2024 01:36:21 PM

Battery 6-Cell NiMH w/Molex...
This is the Traxxas 6-Cell 1200mAH NiMH Battery with Molex Connector.

FEATURES:
Fits the 1/18 scale Traxxas Latrax Rally Vehicle and other 1/18 scale
    automobiles
Shrinkwrapped
Wire lead and Molex adapter

CONSISTS OF:
6-Cell 1200mAH NiMH Battery with Molex Port

NEEDS:
NiMH suitable charger such as Duratrax Onyx 100, DTXP4190

SPECIFICATIONS:
Dimensions: 1.3 x 0.51 x 3.6" (34 x 13 x 91mm)

COMMENTS:
Battery charger supplied with the Latrax Rally vehicle is just for 5-cell
    usage.

The listed below thing likewise sets truly well with the thing being gone over.



This is the Electric Powered, 2.4GHz Radio Controlled, 1/18 scale
Ready-to-Run Latrax SST Arena Truck.

FEATURES:
Chassis: Molded composite nylon monocoque
Drive: 4 wheel shaft
Motor: 370 brushed
Radio: 2.4GHz handgun grip with electronic steering trim control
    waterproof 32 oz-in steering servo and 3-channel micro receiver
ESC: Waterproof, programmable with 3 driver profiles;
    Sport Mode, Race Mode and Training Mode
    Integrated two-stage low-voltage detection for LiPo batteries
Body: ProGraphix, trimmed and painted
Differentials: Gear type with steel ring and pinion gears
Battery: Traxxas Power Cell NiMH 6-cell stick pack w/Standard
    adapter, fast release battery hold down
Battery Battery charger: DC powered 2amp peak discovering
Shocks: Oil-filled, adjustable
Front Suspension: Completely independent
Steering: Bellcrank type with servo saver
Tires: SST grippy, soft substance, aggressive tread pattern
Wheels: Five spoke, 1.38" (35mm) outer diameter
Bumpers: Front and rear flexible composite plastic

CONSISTS OF:
RTR Latrax SST Arena Truck with Brushed Motor, 2.4GHz Radio, ESC,
    NiMH Battery, Battery charger, 4 AA Batteries, Painted Body, Directions

NEEDS:
Track and upkeep devices

SPECIFICATIONS:
Vehicle;
Length: 12.16" (309mm)
Front and Rear Track: 6.73" (171mm) outer edges of wheels measured
    side to side
Weight with Battery: 26.06oz (739g)
Weight without Battery: 20.16oz (572g)
Total Height: 4.61" (117mm)
Wheelbase: 6.44" (163.5mm)
Wheelbase: 6.44" (163.5mm)
Ground Clearance: 0.59" (15mm)
Internal Gear Ratio: 2.5:1
Total Drive Ratio: 15:1 (Stock, Out-of-box)
Gear Pitch: 0.5 Mod.
Front and Rear Shock Length: 2.36" (60mm)
Battery Tray Dimensions: 4.0 x 1.4 x 0.71" (102mm x 35mm x 18mm)
    Body;
Length: 12.2" (310mm)
Width: 6.8" (174mm)
Height: 3.7" (95mm)

COMMENTS:
Readily available in the following body colors;
    Blue, TRAD20BB 76044-1 1/18 LATRAX SS BLU #7 Keegan Kincaid
Edition
    Red, TRAD20RR 76044-1 1/18 LATRAX SS RED #74 Sheldon Creed
Edition

This thing is regularly acquired with the above stated thing.

Mini Body Clips (10)

This is a pack of 10 optional mini body clips from Racers Edge.  These clips are meant for use with 1/18 scale automobiles.

This thing is regularly acquired with the above stated thing.



This is the Electric Powered, 2.4GHz Radio Controlled, 1/18 scale,
Ready to Run LaTrax Teton Beast Truck from Traxxas.

FEATURES:
Chassis: Molded composite nylon monocoque
Drive: 4 wheel, steel center driveshaft
Differentials: Hardened steel bevel gear
Radio: 2.4GHz with 2-channel micro receiver,
    waterproof guiding servo, and all weather electronics that allow
    driving through puddles, ice, slush, and more
Electronic Speed Control: Completely proportional forward, brake, reverse,
    programmbale with 3 drive profiles, Sport, Race and Training
    Mode, two-stage low-voltage detection for optional LiPo battery
Motor: 370 size brushed
Battery: 2/3A 6-cell, 7.2V, 1200mAh NiMH, with Requirement adapter
Battery Battery charger: 2A DC powered
Suspension: Completely independent
Shocks: Oil filled plastic body, coil over
Body: ProGraphix Completely painted with decals applied
Steering: 2 bellcranks on chassis to increase the speed of the
    servo, and supply accurate geometry for the guiding angle of each
    wheel
Ball Bearings: Complete set included
Front and Rear Bumpers: Plastic
Tires: Rubber, off-road tread
Wheels: Five spoke 1.63" (41mm) diameter

CONSISTS OF:
RTR LaTrax Teton Beast Truck, with Motor, 2.4GHz Radio, ESC, NiMH
    Battery, Battery charger, 4 AA Batteries, User's manual, 10T Pinion
    Gear, 60T Spur Gear

SPECIFICATIONS:
Vehicle;
Length: 10.16" (258mm)
Front Track: 4.17" (106mm)
Rear Track: 4.23" (107.5mm)
Weight: 19.2oz (55g) with battery
Weight: 13.3oz (43g) without battery
Height: 4.65" (118mm)
Wheelbase: 6.44" (163.5mm)
Shock Length: 2.36" (60mm)
Ground Clearance: 1.18" (30mm)
Internal Gear Ratio: 2.5:1
Total Drive Ratio: 15:1 stock
Battery Tray Dimensions: 4 x 1.4 x 0.71" (102 x 35 x 18mm)
    Body;
Length: 9.4" (239mm)
Width: 3.6" (91mm)
Height: 3.3" (84mm)

COMMENTS:
Readily available in the following body colors;
    Blue, TRAC50BB Orange, TRAC50NN
    Green, TRAC50GG Red, TRAC50RR

If replacement ball bearings are required, Traxxas provides the
    7541X, Latrax Ball Bearing Set TRAC9804, that changes all of the
    ball bearings.
X-Plosion Parts Finder Traxxas LaTrax 1/18 Rally

Frequently Bought Together

Traxxas Battery 6-Cell Nimh W/Molex (Fits Latrax 1/18 Models)
+
Racers Edge Mini Body Clips (10)
+
Traxxas Servo, Sub-Micro, Waterproof
This Item: Traxxas Battery 6-Cell Nimh W/Molex (Fits Latrax 1/18 Models)
$19.95
Racers Edge Mini Body Clips (10)
$2.99
Traxxas Servo, Sub-Micro, Waterproof
$27.95

Total Price: $50.89

Add All Three To Cart

Customers who bought this product also purchased

Visual Parts Finder
";